Merge pull request #283 from bjdgyc/dev

修复容器频繁重启的问题

README.md

@@ -24,7 +24,8 @@ AnyLink 基于 [ietf-openconnect](https://tools.ietf.org/html/draft-mavrogiannop
 
 AnyLink 使用 TLS/DTLS 进行数据加密，因此需要 RSA 或 ECC 证书，可以通过 Let's Encrypt 和 TrustAsia 申请免费的 SSL 证书。
 
-AnyLink 服务端仅在 CentOS 7、CentOS 8、Ubuntu 18.04、Ubuntu 20.04 测试通过，如需要安装在其他系统，需要服务端支持 tun/tap 功能、ip 设置命令。
+AnyLink 服务端仅在 CentOS 7、CentOS 8、Ubuntu 18.04、Ubuntu 20.04 测试通过，如需要安装在其他系统，需要服务端支持 tun/tap
+功能、ip 设置命令。
 
 ## Screenshot
 
@@ -52,6 +53,8 @@ AnyLink 服务端仅在 CentOS 7、CentOS 8、Ubuntu 18.04、Ubuntu 20.04 测试
 >
 > 对于线上环境，必须申请安全的 https 证书，不支持私有证书连接
 >
+> 服务端安装 yum install iproute 或者 apt-get install iproute2
+>
 > 客户端请使用群共享文件的版本，其他版本没有测试过，不保证使用正常
 >
 > 其他问题 [前往查看](doc/question.md)
@@ -60,11 +63,17 @@ AnyLink 服务端仅在 CentOS 7、CentOS 8、Ubuntu 18.04、Ubuntu 20.04 测试
 
 ### 自行编译安装
 
-> 需要提前安装好 golang >= 1.19 和 nodejs >= 14.x 和 yarn >= v1.22.x
+> 需要提前安装好 golang >= 1.19 和 nodejs >= 16.x 和 yarn >= v1.22.x
 
 ```shell
 git clone https://github.com/bjdgyc/anylink.git
 
+# 编译参考软件版本
+# go 1.20.12
+# node v16.20.2
+# yarn 1.22.19
+
+
 cd anylink
 sh build.sh
 
@@ -121,7 +130,7 @@ sudo ./anylink
 > 数据库配置示例
 
 | db_type  | db_source                                              |
-| -------- | ------------------------------------------------------ |
+|----------|--------------------------------------------------------|
 | sqlite3  | ./conf/anylink.db                                      |
 | mysql    | user:password@tcp(127.0.0.1:3306)/anylink?charset=utf8 |
 | postgres | user:password@localhost/anylink?sslmode=verify-full    |
@@ -134,9 +143,11 @@ sudo ./anylink
 
 > 以下参数必须设置其中之一
 
-网络模式选择，需要配置 `link_mode` 参数，如 `link_mode="tun"`,`link_mode="macvtap"`,`link_mode="tap"(不推荐)` 等参数。 不同的参数需要对服务器做相应的设置。
+网络模式选择，需要配置 `link_mode` 参数，如 `link_mode="tun"`,`link_mode="macvtap"`,`link_mode="tap"(不推荐)` 等参数。
+不同的参数需要对服务器做相应的设置。
 
-建议优先选择 tun 模式，其次选择 macvtap 模式，因客户端传输的是 IP 层数据，无须进行数据转换。 tap 模式是在用户态做的链路层到 IP 层的数据互相转换，性能会有所下降。 如果需要在虚拟机内开启 tap
+建议优先选择 tun 模式，其次选择 macvtap 模式，因客户端传输的是 IP 层数据，无须进行数据转换。 tap 模式是在用户态做的链路层到
+IP 层的数据互相转换，性能会有所下降。 如果需要在虚拟机内开启 tap
 模式，请确认虚拟机的网卡开启混杂模式。
 
 ### tun 设置
@@ -190,7 +201,6 @@ https://cloud.tencent.com/document/product/216/62007
 
 ```
 
-
 3. 使用 AnyConnect 客户端连接即可
 
 ### macvtap 设置
@@ -204,6 +214,9 @@ https://cloud.tencent.com/document/product/216/62007
 # 首先关闭nat转发功能
 iptables_nat = false
 
+# master网卡需要打开混杂模式
+ip link set dev eth0 promisc on
+
 #内网主网卡名称
 ipv4_master = "eth0"
 #以下网段需要跟ipv4_master网卡设置成一样
@@ -213,7 +226,6 @@ ipv4_start = "10.1.2.100"
 ipv4_end = "10.1.2.200"
 ```
 
-
 ## Systemd
 
 1. 添加 anylink 程序
@@ -281,7 +293,7 @@ ipv4_end = "10.1.2.200"
        -c=/etc/server.toml --ip_lease=1209600 # IP地址租约时长
    ```
 
-7. 构建镜像
+7. 构建镜像 (非必需)
 
    ```bash
    #获取仓库源码
@@ -290,14 +302,15 @@ ipv4_end = "10.1.2.200"
    docker build -t anylink -f docker/Dockerfile .
    ```
 
-
 ## 常见问题
 
 请前往 [问题地址](doc/question.md) 查看具体信息
 
 ## Discussion
 
-添加QQ群: 567510628
+添加QQ群(1): 567510628
+
+添加QQ群(2): 739072205
 
 群共享文件有相关软件下载
 
@@ -307,7 +320,6 @@ ipv4_end = "10.1.2.200"
 ![contact_me_qr](doc/screenshot/contact_me_qr.png)
 -->
 
-
 ## Contribution
 
 欢迎提交 PR、Issues，感谢为 AnyLink 做出贡献。

build.sh

@@ -12,6 +12,9 @@ function RETVAL() {
 #当前目录
 cpath=$(pwd)
 
+ver=`cat server/base/app_ver.go | grep APP_VER | awk '{print $3}' | sed 's/"//g'`
+echo "当前版本 $ver"
+
 echo "编译前端项目"
 cd $cpath/web
 #国内可替换源加快速度
@@ -33,7 +36,7 @@ cp -rf $cpath/web/ui .
 #国内可替换源加快速度
 export GOPROXY=https://goproxy.io
 go mod tidy
-go build -v -o anylink -ldflags "-X main.CommitId=$(git rev-parse HEAD)"
+go build -v -o anylink -ldflags "-s -w -X main.CommitId=$(git rev-parse HEAD)"
 RETVAL $?
 
 cd $cpath
@@ -49,6 +52,7 @@ cp -r server/conf $deploy
 
 cp -r systemd $deploy
 cp -r LICENSE $deploy
+cp -r home $deploy
 
 tar zcvf ${deploy}.tar.gz $deploy
 

build_docker.sh

@@ -6,10 +6,13 @@ echo $ver
 #docker login -u bjdgyc
 
 #docker build -t bjdgyc/anylink .
-docker build -t bjdgyc/anylink -f docker/Dockerfile .
+
+docker build -t bjdgyc/anylink --build-arg GitCommitId=$(git rev-parse HEAD) -f docker/Dockerfile .
 
 docker tag bjdgyc/anylink:latest bjdgyc/anylink:$ver
 
+exit 0
+
 docker push bjdgyc/anylink:$ver
 docker push bjdgyc/anylink:latest
 

doc/README.md

@@ -10,32 +10,39 @@
 
 > 感谢以下同学的打赏，AnyLink 有你更美好！
 >
-> 需要展示主页的同学，可以在QQ群(567510628) 直接联系我添加。
+> 需要展示主页的同学，可以在QQ群 直接联系我添加。
 
-| 昵称      | 主页                         |
+| 昵称        | 主页 / 留言                      |
-|---------| ---------------------------- |
+|-----------|------------------------------|
-| 代码 oo8  |                              |
+| 代码 oo8    |                              |
-| 甘磊      | https://github.com/ganlei333 |
+| 甘磊        | https://github.com/ganlei333 |
-| Oo@     | https://github.com/chooop    |
+| Oo@       | https://github.com/chooop    |
-| 虚极静笃    |                              |
+| 虚极静笃      |                              |
-| 请喝可乐    |                              |
+| 请喝可乐      |                              |
-| 加油加油    |                              |
+| 加油加油      |                              |
-| 李建      |                              |
+| 李建        |                              |
-| lanbin  |                              |
+| lanbin    |                              |
-| 乐在东途    |                              |
+| 乐在东途      |                              |
-| 孤鸿      |                              |
+| 孤鸿        |                              |
-| 刘国华     |                              |
+| 刘国华       |                              |
-| 改名好无聊   |                              |
+| 改名好无聊     |                              |
-| 全能互联网专家 |                              |
+| 全能互联网专家   |                              |
-| JCM     |                              |
+| JCM       |                              |
-| Eh...   |                              |
+| Eh...     |                              |
-| 沉       |                              |
+| 沉         |                              |
-| 刘国华     |                              |
+| 刘国华       |                              |
-| 忧郁的豚骨拉面 |                              |
+| 忧郁的豚骨拉面   |                              |
-| 张小旋当爹地  |                              |
+| 张小旋当爹地    |                              |
-| Ronny   |                              |
+| 对方正在输入    |                              |
-| 奔跑的少年   |                              |
+| Ronny     |                              |
-| ZBW     |                              |
+| 奔跑的少年     |                              |
+| ZBW       |                              |
+| 悲鸣        |                              |
+| 谢谢        |                              |
+| 云思科技      |                              |
+| 哆啦A伟(张佳伟) | 嘿嘿                           |
+| 人类的悲欢并不相通 | 开源不易，感谢分享                    |
+| 做人要低调     |                              |
 
 
 

doc/question.md

@@ -1,34 +1,53 @@
 ## 常见问题
 
 ### anyconnect 客户端问题
+
 > 客户端请使用群共享文件的版本，其他版本没有测试过，不保证使用正常
 >
 > 添加QQ群: 567510628
 
 ### OTP 动态码
+
 > 请使用手机安装 freeotp ，然后扫描otp二维码，生成的数字即是动态码
 
 ### 远程桌面连接
+
 > 本软件已经支持远程桌面里面连接anyconnect。
 
 ### 私有证书问题
+
 > anylink 默认不支持私有证书
 >
 > 其他使用私有证书的问题，请自行解决
 
+### 客户端连接名称
+
+> 客户端连接名称需要修改 [profile.xml](../server/conf/profile.xml) 文件
+
+```xml
+
+<HostEntry>
+    <HostName>VPN</HostName>
+    <HostAddress>localhost</HostAddress>
+</HostEntry>
+```
+
 ### dpd timeout 设置问题
-```
+
+```yaml
 #客户端失效检测时间(秒) dpd > keepalive
-cstp_keepalive = 6
+cstp_keepalive = 4
-cstp_dpd = 10
+cstp_dpd = 9
-mobile_keepalive = 15
+mobile_keepalive = 7
-mobile_dpd = 20
+mobile_dpd = 15
 ```
+
 > 以上dpd参数为客户端的超时检测时间, 如一段时间内，没有数据传输，防火墙会主动关闭连接
 >
 > 如经常出现 timeout 的错误信息，应根据当前防火墙的设置，适当减小dpd数值
 
 ### 反向代理问题
+
 > anylink 仅支持四层反向代理，不支持七层反向代理
 >
 > 如Nginx请使用 stream模块
@@ -46,7 +65,36 @@ stream {
 }
 ```
 
+> nginx实现 共用443端口 示例
+
+```conf
+stream {
+    map $ssl_preread_server_name $name {
+        vpn.xx.com        myvpn;
+        default     defaultpage;
+    }
+    
+    # upstream pool
+    upstream myvpn {
+        server 127.0.0.1:8443;
+    }
+    upstream defaultpage {
+        server 127.0.0.1:8080;
+    }
+    
+    server {
+        listen 443 so_keepalive=on;
+        ssl_preread on;
+        #接收端也需要设置 proxy_protocol
+        #proxy_protocol on;
+        proxy_pass $name;
+    }
+}
+
+```
+
 ### 性能问题
+
 ```
 内网环境测试数据
 虚拟服务器：  centos7 4C8G
@@ -55,6 +103,7 @@ anylink:    tun模式 tcp传输
 客户端网卡下载速度：270Mb/s
 服务端网卡上传速度：280Mb/s
 ```
+
 > 客户端tls加密协议、隧道header头都会占用一定带宽
 
 

docker/Dockerfile

@@ -1,40 +1,49 @@
+#node:16-bullseye
+#golang:1.20-bullseye
+#debian:bullseye-slim
+#sed -i 's/deb.debian.org/mirrors.ustc.edu.cn/g' /etc/apt/sources.list
+
+
 # web
-FROM node:16.17.1-alpine3.15 as builder_node
+FROM node:16-alpine3.18 as builder_node
 WORKDIR /web
 COPY ./web /web
 RUN yarn install \
     && yarn run build \
     && ls /web/ui
 
+
 # server
-FROM golang:1.19-alpine as builder_golang
+FROM golang:1.20-alpine3.18 as builder_golang
 #TODO 本地打包时使用镜像
-ENV GOPROXY=https://goproxy.io
+ENV GOPROXY=https://goproxy.cn
 ENV GOOS=linux
+ARG GitCommitId="gitCommitId"
+
 WORKDIR /anylink
-COPY . /anylink
+COPY server /anylink
-COPY --from=builder_node /web/ui  /anylink/server/ui
+COPY --from=builder_node /web/ui  /anylink/ui
 
 #TODO 本地打包时使用镜像
 RUN sed -i 's/dl-cdn.alpinelinux.org/mirrors.tuna.tsinghua.edu.cn/g' /etc/apk/repositories
-RUN apk add --no-cache git gcc musl-dev
+RUN apk add gcc musl-dev
-RUN cd /anylink/server;go mod tidy;go build -o anylink -ldflags "-X main.CommitId=$(git rev-parse HEAD)" \
+RUN cd /anylink;go mod tidy;go build -o anylink -ldflags "-s -w -X main.CommitId=${GitCommitId}" \
-    && /anylink/server/anylink tool -v
+    && /anylink/anylink tool -v
+
 
 # anylink
-FROM alpine
+FROM alpine:3.18
 LABEL maintainer="github.com/bjdgyc"
 
-#ENV IPV4_CIDR="192.168.10.0/24"
+ENV ANYLINK_IN_CONTAINER=true
 
 WORKDIR /app
-COPY --from=builder_golang /anylink/server/anylink  /app/
+COPY --from=builder_golang /anylink/anylink  /app/
 COPY docker/docker_entrypoint.sh  /app/
-
+COPY ./server/bridge-init.sh /app/
-#COPY ./server/bridge-init.sh /app/
 COPY ./server/conf  /app/conf
 COPY ./LICENSE  /app/LICENSE
-
+COPY ./home  /app/home
 
 #TODO 本地打包时使用镜像
 RUN sed -i 's/dl-cdn.alpinelinux.org/mirrors.tuna.tsinghua.edu.cn/g' /etc/apk/repositories

docker/docker_entrypoint.sh

@@ -14,7 +14,7 @@ case $var1 in
   ;;
 
 *)
-  sysctl -w net.ipv4.ip_forward=1
+  #sysctl -w net.ipv4.ip_forward=1
   #iptables -t nat -A POSTROUTING -s "${IPV4_CIDR}" -o eth0+ -j MASQUERADE
   #iptables -nL -t nat
 

home/自定义首页1.html

@@ -0,0 +1,101 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <meta charset="UTF-8">
+  <title>AnyLink - 企业级远程办公 SSL VPN</title>
+  <style>
+    /* CSS样式表 */
+    body {
+      font-family: Arial, sans-serif;
+      margin: 0;
+      padding: 0;
+    }
+    
+    header {
+      background-color: #333;
+      color: #fff;
+      padding: 20px;
+      text-align: center;
+    }
+    
+    h1 {
+      margin: 0;
+      font-size: 32px;
+    }
+    
+    main {
+      max-width: 960px;
+      margin: 20px auto;
+      padding: 0 20px;
+	  margin-bottom: 100px;
+    }
+    
+    p {
+      line-height: 1.5;
+    }
+    
+	/* 设置页脚固定在底部，并且占满横向宽度 */
+	footer {
+		position: fixed;
+		bottom: 0;
+		left: 0;
+		width: 100%;
+	}
+	
+    footer {
+      background-color: #f2f2f2;
+      padding: 20px;
+      text-align: center;
+    }
+	
+    
+    .cta-button {
+      display: inline-block;
+      background-color: #007bff;
+      color: #fff;
+      padding: 10px 20px;
+      text-decoration: none;
+      border-radius: 4px;
+      font-weight: bold;
+      margin-right: 10px;
+    }
+  </style>
+</head>
+<body>
+  <header>
+    <h1>欢迎使用 AnyLink</h1>
+  </header>
+
+  <main>
+    <h2>什么是 AnyLink？</h2>
+    <p>AnyLink 是一款面向企业级的远程办公 SSL VPN 软件，支持多人同时在线使用。它提供安全、便捷的访问内部网络资源的方式，使远程工作者能够有效协作。</p>
+
+    <h2>核心功能</h2>
+    <ul>
+      <li>安全远程访问：AnyLink 使用 SSL/TLS 加密技术，确保远程用户与企业网络之间的连接安全可靠。</li>
+      <li>多用户支持：多个用户可以同时连接 VPN，实现不同地点团队的无缝协作。</li>
+      <li>灵活网络访问：AnyLink 能够安全地让远程工作者访问内部资源，如文件、应用程序和数据库。</li>
+      <li>集中化管理：该 VPN 解决方案提供集中化管理控制台，便于用户管理、访问控制和监控。</li>
+    </ul>
+
+    <h2>开始使用 AnyLink</h2>
+    <p>体验 AnyLink 为您的企业远程办公需求所带来的便利和安全。</p>
+
+    <h2>下载客户端</h2>
+    <a href="/files/anyconnect-win-4.10.05111.msi" class="cta-button">Windows 客户端</a>
+    <a href="/files/anyconnect-macos-4.10.05111.dmg" class="cta-button">Mac 客户端</a>
+
+    <a href="https://apps.apple.com/cn/app/cisco-secure-client/id1135064690" class="cta-button">iOS 客户端</a>
+    <a href="/files/CiscoSecureClientAnyConnect_v5.0.00247.apk" class="cta-button">Android 客户端</a>
+
+    <a href="/files/freeotp.apk" class="cta-button">Android FreeOTP客户端</a>
+    <a href="https://apps.apple.com/cn/app/freeotp-authenticator/id872559395" class="cta-button">iOS FreeOTP客户端</a>
+    <h2>使用手册</h2>
+    <a href="/files/anylink_doc.pdf" class="cta-button">使用手册(Windows)</a>
+  </main>
+
+  <footer>
+    &copy; 2023 AnyLink. 保留所有权利。
+  </footer>
+</body>
+</html>

server/admin/api_base.go

@@ -8,6 +8,7 @@ import (
 	"github.com/bjdgyc/anylink/base"
 	"github.com/bjdgyc/anylink/pkg/utils"
 	"github.com/gorilla/mux"
+	"github.com/xlzd/gotp"
 )
 
 // Login 登陆接口
@@ -20,10 +21,35 @@ func Login(w http.ResponseWriter, r *http.Request) {
 	adminUser := r.PostFormValue("admin_user")
 	adminPass := r.PostFormValue("admin_pass")
 
+	// 启用otp验证
+	if base.Cfg.AdminOtp != "" {
+		pwd := adminPass
+		pl := len(pwd)
+		if pl < 6 {
+			RespError(w, RespUserOrPassErr)
+			base.Error(adminUser, "管理员otp错误")
+			return
+		}
+		// 判断otp信息
+		adminPass = pwd[:pl-6]
+		otp := pwd[pl-6:]
+
+		totp := gotp.NewDefaultTOTP(base.Cfg.AdminOtp)
+		unix := time.Now().Unix()
+		verify := totp.Verify(otp, int(unix))
+
+		if !verify {
+			RespError(w, RespUserOrPassErr)
+			base.Error(adminUser, "管理员otp错误")
+			return
+		}
+	}
+
 	// 认证错误
 	if !(adminUser == base.Cfg.AdminUser &&
 		utils.PasswordVerify(adminPass, base.Cfg.AdminPass)) {
 		RespError(w, RespUserOrPassErr)
+		base.Error(adminUser, "管理员用户名或密码错误")
 		return
 	}
 
@@ -41,6 +67,14 @@ func Login(w http.ResponseWriter, r *http.Request) {
 	data["admin_user"] = adminUser
 	data["expires_at"] = expiresAt
 
+	ck := &http.Cookie{
+		Name:     "jwt",
+		Value:    tokenString,
+		Path:     "/",
+		HttpOnly: true,
+	}
+	http.SetCookie(w, ck)
+
 	RespSucess(w, data)
 }
 
@@ -50,13 +84,15 @@ func authMiddleware(next http.Handler) http.Handler {
 		w.Header().Set("Access-Control-Allow-Methods", "GET,POST,OPTIONS")
 		w.Header().Set("Access-Control-Allow-Headers", "*")
 		if r.Method == http.MethodOptions {
+			// 正式环境不支持 OPTIONS
+			w.WriteHeader(http.StatusForbidden)
 			return
 		}
 
 		route := mux.CurrentRoute(r)
 		name := route.GetName()
 		// fmt.Println("bb", r.URL.Path, name)
-		if utils.InArrStr([]string{"login", "index", "static", "debug"}, name) {
+		if utils.InArrStr([]string{"login", "index", "static"}, name) {
 			// 不进行鉴权
 			next.ServeHTTP(w, r)
 			return
@@ -67,6 +103,12 @@ func authMiddleware(next http.Handler) http.Handler {
 		if jwtToken == "" {
 			jwtToken = r.FormValue("jwt")
 		}
+		if jwtToken == "" {
+			cc, err := r.Cookie("jwt")
+			if err == nil {
+				jwtToken = cc.Value
+			}
+		}
 		data, err := GetJwtData(jwtToken)
 		if err != nil || base.Cfg.AdminUser != fmt.Sprint(data["admin_user"]) {
 			w.WriteHeader(http.StatusUnauthorized)

server/admin/api_uploaduser.go

@@ -5,11 +5,11 @@ import (
 	"io"
 	"net/http"
 	"os"
+	"path"
 	"strconv"
 	"strings"
 	"time"
 
-	"github.com/bjdgyc/anylink/base"
 	"github.com/bjdgyc/anylink/dbdata"
 	"github.com/bjdgyc/anylink/pkg/utils"
 	mapset "github.com/deckarep/golang-set"
@@ -25,21 +25,27 @@ func UserUpload(w http.ResponseWriter, r *http.Request) {
 		return
 	}
 	defer file.Close()
-	newFile, err := os.Create(base.Cfg.FilesPath + header.Filename)
+
+	// go/path-injection
+	// base.Cfg.FilesPath 可以直接对外访问，不能上传文件到此
+	fileName := path.Join(os.TempDir(), utils.RandomRunes(10))
+	newFile, err := os.Create(fileName)
 	if err != nil {
 		RespError(w, RespInternalErr, "创建文件失败:", err)
 		return
 	}
 	defer newFile.Close()
+
 	io.Copy(newFile, file)
 	if err = UploadUser(newFile.Name()); err != nil {
 		RespError(w, RespInternalErr, err)
-		os.Remove(base.Cfg.FilesPath + header.Filename)
+		os.Remove(fileName)
 		return
 	}
-	os.Remove(base.Cfg.FilesPath + header.Filename)
+	os.Remove(fileName)
 	RespSucess(w, "批量添加成功")
 }
+
 func UploadUser(file string) error {
 	f, err := excelize.OpenFile(file)
 	if err != nil {

server/admin/api_user.go

@@ -205,6 +205,7 @@ type userAccountMailData struct {
 	LinkAddr     string
 	Group        string
 	Username     string
+	Nickname     string
 	PinCode      string
 	OtpImg       string
 	OtpImgBase64 string
@@ -251,9 +252,11 @@ func userAccountMail(user *dbdata.User) error {
 	otpData, _ := userOtpQr(user.Id, true)
 
 	data := userAccountMailData{
+		Issuer:       base.Cfg.Issuer,
 		LinkAddr:     setting.LinkAddr,
 		Group:        strings.Join(user.Groups, ","),
 		Username:     user.Username,
+		Nickname:     user.Nickname,
 		PinCode:      user.PinCode,
 		OtpImg:       fmt.Sprintf("https://%s/otp_qr?id=%d&jwt=%s", setting.LinkAddr, user.Id, tokenString),
 		OtpImgBase64: "data:image/png;base64," + otpData,

server/admin/server.go

@@ -10,6 +10,7 @@ import (
 	"github.com/arl/statsviz"
 	"github.com/bjdgyc/anylink/base"
 	"github.com/bjdgyc/anylink/dbdata"
+	"github.com/bjdgyc/anylink/pkg/utils"
 	"github.com/gorilla/handlers"
 	"github.com/gorilla/mux"
 )
@@ -20,6 +21,13 @@ var UiData embed.FS
 func StartAdmin() {
 
 	r := mux.NewRouter()
+	// 所有路由添加安全头
+	r.Use(func(next http.Handler) http.Handler {
+		return http.HandlerFunc(func(w http.ResponseWriter, req *http.Request) {
+			utils.SetSecureHeader(w)
+			next.ServeHTTP(w, req)
+		})
+	})
 	r.Use(authMiddleware)
 	r.Use(handlers.CompressHandler)
 

server/base/app_ver.go

@@ -3,5 +3,5 @@ package base
 const (
 	APP_NAME = "AnyLink"
 	// app版本号
-	APP_VER = "0.9.3"
+	APP_VER = "0.10.1"
 )

server/base/cfg.go

@@ -49,6 +49,7 @@ type ServerConfig struct {
 	Issuer         string `json:"issuer"`
 	AdminUser      string `json:"admin_user"`
 	AdminPass      string `json:"admin_pass"`
+	AdminOtp       string `json:"admin_otp"`
 	JwtSecret      string `json:"jwt_secret"`
 
 	LinkMode    string `json:"link_mode"`    // tun tap macvtap ipvtap

server/base/cmd.go

@@ -3,14 +3,17 @@ package base
 import (
 	"errors"
 	"fmt"
+	"io"
 	"os"
 	"reflect"
 	"runtime"
 	"strings"
 
 	"github.com/bjdgyc/anylink/pkg/utils"
+	"github.com/skip2/go-qrcode"
 	"github.com/spf13/cobra"
 	"github.com/spf13/viper"
+	"github.com/xlzd/gotp"
 )
 
 var (
@@ -18,6 +21,8 @@ var (
 	CommitId string
 	// pass明文
 	passwd string
+	// 生成otp
+	otp bool
 	// 生成密钥
 	secret bool
 	// 显示版本信息
@@ -80,7 +85,6 @@ func initCmd() {
 	linkViper.SetEnvPrefix("link")
 
 	// 基础配置
-
 	for _, v := range configs {
 		if v.Typ == cfgStr {
 			rootCmd.Flags().StringP(v.Name, v.Short, v.ValStr, v.Usage)
@@ -113,7 +117,7 @@ func initCmd() {
 		linkViper.SetConfigFile(conf)
 		err = linkViper.ReadInConfig()
 		if err != nil {
-			fmt.Println("Using config file:", err)
+			panic("config file err:" + err.Error())
 		}
 	})
 }
@@ -128,6 +132,7 @@ func initToolCmd() *cobra.Command {
 	toolCmd.Flags().BoolVarP(&rev, "version", "v", false, "display version info")
 	toolCmd.Flags().BoolVarP(&secret, "secret", "s", false, "generate a random jwt secret")
 	toolCmd.Flags().StringVarP(&passwd, "passwd", "p", "", "convert the password plaintext")
+	toolCmd.Flags().BoolVarP(&otp, "otp", "o", false, "generate a random otp secret")
 	toolCmd.Flags().BoolVarP(&debug, "debug", "d", false, "list the config viper.Debug() info")
 
 	toolCmd.Run = func(cmd *cobra.Command, args []string) {
@@ -138,6 +143,13 @@ func initToolCmd() *cobra.Command {
 			s, _ := utils.RandSecret(40, 60)
 			s = strings.Trim(s, "=")
 			fmt.Printf("Secret:%s\n", s)
+		case otp:
+			s := gotp.RandomSecret(32)
+			fmt.Printf("Otp:%s\n\n", s)
+			qrstr := fmt.Sprintf("otpauth://totp/%s:%s?issuer=%s&secret=%s", "anylink_admin", "admin@anylink", "anylink_admin", s)
+			qr, _ := qrcode.New(qrstr, qrcode.High)
+			ss := qr.ToSmallString(false)
+			io.WriteString(os.Stderr, ss)
 		case passwd != "":
 			pass, _ := utils.PasswordHash(passwd)
 			fmt.Printf("Passwd:%s\n", pass)

server/base/config.go

@@ -38,6 +38,7 @@ var configs = []config{
 	{Typ: cfgStr, Name: "issuer", Usage: "系统名称", ValStr: "XX公司VPN"},
 	{Typ: cfgStr, Name: "admin_user", Usage: "管理用户名", ValStr: "admin"},
 	{Typ: cfgStr, Name: "admin_pass", Usage: "管理用户密码", ValStr: defaultPwd},
+	{Typ: cfgStr, Name: "admin_otp", Usage: "管理用户otp,生成命令 ./anylink tool -o", ValStr: ""},
 	{Typ: cfgStr, Name: "jwt_secret", Usage: "JWT密钥", ValStr: defaultJwt},
 	{Typ: cfgStr, Name: "link_mode", Usage: "虚拟网络类型[tun tap macvtap ipvtap]", ValStr: "tun"},
 	{Typ: cfgStr, Name: "ipv4_master", Usage: "ipv4主网卡名称", ValStr: "eth0"},
@@ -52,7 +53,7 @@ var configs = []config{
 	{Typ: cfgInt, Name: "max_client", Usage: "最大用户连接", ValInt: 200},
 	{Typ: cfgInt, Name: "max_user_client", Usage: "最大单用户连接", ValInt: 3},
 	{Typ: cfgInt, Name: "cstp_keepalive", Usage: "keepalive时间(秒)", ValInt: 4},
-	{Typ: cfgInt, Name: "cstp_dpd", Usage: "死链接检测时间(秒)", ValInt: 10},
+	{Typ: cfgInt, Name: "cstp_dpd", Usage: "死链接检测时间(秒)", ValInt: 9},
 	{Typ: cfgInt, Name: "mobile_keepalive", Usage: "移动端keepalive接检测时间(秒)", ValInt: 7},
 	{Typ: cfgInt, Name: "mobile_dpd", Usage: "移动端死链接检测时间(秒)", ValInt: 15},
 	{Typ: cfgInt, Name: "mtu", Usage: "最大传输单元MTU", ValInt: 1460},

server/base/log.go

@@ -103,7 +103,7 @@ func logLevel2Int(l string) int {
 	}
 	lvl := LogLevelInfo
 	for k, v := range levels {
-		if strings.EqualFold(strings.ToLower(l), strings.ToLower(v)) {
+		if strings.ToLower(l) == strings.ToLower(v) {
 			lvl = k
 		}
 	}

server/base/mod.go

@@ -0,0 +1,77 @@
+package base
+
+import (
+	"bufio"
+	"fmt"
+	"log"
+	"os"
+	"os/exec"
+	"strings"
+)
+
+const (
+	procModulesPath = "/proc/modules"
+	inContainerKey  = "ANYLINK_IN_CONTAINER"
+	tunPath         = "/dev/net/tun"
+)
+
+var (
+	InContainer = false
+	modMap      = map[string]struct{}{}
+)
+
+func initMod() {
+	container := os.Getenv(inContainerKey)
+	if container == "true" {
+		InContainer = true
+	}
+	log.Println("InContainer", InContainer)
+
+	file, err := os.Open(procModulesPath)
+	if err != nil {
+		err = fmt.Errorf("[ERROR] Problem with open file: %s", err)
+		panic(err)
+	}
+	defer file.Close()
+	scanner := bufio.NewScanner(file)
+	scanner.Split(bufio.ScanLines)
+	for scanner.Scan() {
+		splited := strings.Split(scanner.Text(), " ")
+		if len(splited[0]) > 0 {
+			modMap[splited[0]] = struct{}{}
+		}
+	}
+}
+
+func CheckModOrLoad(mod string) {
+	log.Println("CheckModOrLoad", mod)
+
+	if _, ok := modMap[mod]; ok {
+		return
+	}
+
+	if mod == "tun" || mod == "tap" {
+		_, err := os.Stat(tunPath)
+		if err == nil {
+			// 文件存在
+			return
+		}
+		panic("Linux tunFile is null " + tunPath)
+	}
+
+	if InContainer {
+		err := fmt.Errorf("Linux module %s is not loaded, please run `modprobe %s`", mod, mod)
+		// log.Println(err)
+		// return
+		panic(err)
+	}
+
+	cmdstr := fmt.Sprintln("modprobe", mod)
+
+	cmd := exec.Command("sh", "-c", cmdstr)
+	b, err := cmd.CombinedOutput()
+	if err != nil {
+		log.Println(string(b))
+		panic(err)
+	}
+}

server/base/start.go

@@ -4,6 +4,7 @@ func Start() {
 	execute()
 	initCfg()
 	initLog()
+	initMod()
 }
 
 func Test() {

server/conf/files/info.txt

@@ -1,2 +1,2 @@
 客户端软件需放置在files目录内，
-如需要帮助请加QQ群：567510628
+如需要帮助请加QQ群：567510628 、739072205

server/conf/profile.xml

@@ -8,6 +8,7 @@
         <RestrictPreferenceCaching>false</RestrictPreferenceCaching>
         <RestrictTunnelProtocols>IPSec</RestrictTunnelProtocols>
         <BypassDownloader>true</BypassDownloader>
+        <AutoUpdate UserControllable="false">false</AutoUpdate>
         <WindowsVPNEstablishment>AllowRemoteUsers</WindowsVPNEstablishment>
         <LinuxVPNEstablishment>AllowRemoteUsers</LinuxVPNEstablishment>
         <CertEnrollmentPin>pinAllowed</CertEnrollmentPin>
@@ -20,15 +21,19 @@
             </ExtendedKeyUsage>
         </CertificateMatch>
 
-        <BackupServerList>
-            <HostAddress>localhost</HostAddress>
-        </BackupServerList>
     </ClientInitialization>
 
     <ServerList>
+
         <HostEntry>
-            <HostName>VPN Server</HostName>
+            <HostName>VPN</HostName>
             <HostAddress>localhost</HostAddress>
         </HostEntry>
+
+        <HostEntry>
+            <HostName>VPN2</HostName>
+            <HostAddress>localhost2</HostAddress>
+        </HostEntry>
+
     </ServerList>
 </AnyConnectProfile>

server/conf/server-sample.toml

@@ -23,6 +23,9 @@ issuer = "XX公司VPN"
 admin_user = "admin"
 #pass 123456
 admin_pass = "$2a$10$UQ7C.EoPifDeJh6d8.31TeSPQU7hM/NOM2nixmBucJpAuXDQNqNke"
+# 留空表示不开启 otp, 开启otp后密码为  pass + 6位otp
+# 生成 ./anylink tool -o
+admin_otp = ""
 jwt_secret = "abcdef.0123456789.abcdef"
 
 

server/conf/server.toml

@@ -18,6 +18,9 @@ issuer = "XX公司VPN"
 admin_user = "admin"
 #pass 123456
 admin_pass = "$2a$10$UQ7C.EoPifDeJh6d8.31TeSPQU7hM/NOM2nixmBucJpAuXDQNqNke"
+# 留空表示不开启 otp, 开启otp后密码为  pass + 6位otp
+# 生成 ./anylink tool -o
+admin_otp = ""
 jwt_secret = "abcdef.0123456789.abcdef"
 
 #服务监听地址
@@ -38,6 +41,6 @@ iptables_nat = true
 
 
 #客户端显示详细错误信息(线上环境慎开启)
-display_error = false
+display_error = true
 
 

server/dbdata/cert.go

@@ -64,8 +64,7 @@ type DNSProvider struct {
 		SecretKey string `json:"secretKey"`
 	} `json:"txcloud"`
 	CfCloud struct {
-		AuthEmail string `json:"authEmail"`
+		AuthToken string `json:"authToken"`
-		AuthKey   string `json:"authKey"`
 	} `json:"cfcloud"`
 }
 type LegoUserData struct {
@@ -89,15 +88,15 @@ type LeGoClient struct {
 func GetDNSProvider(l *SettingLetsEncrypt) (Provider challenge.Provider, err error) {
 	switch l.Name {
 	case "aliyun":
-		if Provider, err = alidns.NewDNSProviderConfig(&alidns.Config{APIKey: l.DNSProvider.AliYun.APIKey, SecretKey: l.DNSProvider.AliYun.SecretKey, TTL: 600}); err != nil {
+		if Provider, err = alidns.NewDNSProviderConfig(&alidns.Config{APIKey: l.DNSProvider.AliYun.APIKey, SecretKey: l.DNSProvider.AliYun.SecretKey, PropagationTimeout: 60 * time.Second, PollingInterval: 2 * time.Second, TTL: 600}); err != nil {
 			return
 		}
 	case "txcloud":
-		if Provider, err = tencentcloud.NewDNSProviderConfig(&tencentcloud.Config{SecretID: l.DNSProvider.TXCloud.SecretID, SecretKey: l.DNSProvider.TXCloud.SecretKey, TTL: 600}); err != nil {
+		if Provider, err = tencentcloud.NewDNSProviderConfig(&tencentcloud.Config{SecretID: l.DNSProvider.TXCloud.SecretID, SecretKey: l.DNSProvider.TXCloud.SecretKey, PropagationTimeout: 60 * time.Second, PollingInterval: 2 * time.Second, TTL: 600}); err != nil {
 			return
 		}
-	case "cloudflare":
+	case "cfcloud":
-		if Provider, err = cloudflare.NewDNSProviderConfig(&cloudflare.Config{AuthEmail: l.DNSProvider.CfCloud.AuthEmail, AuthKey: l.DNSProvider.CfCloud.AuthKey, TTL: 600}); err != nil {
+		if Provider, err = cloudflare.NewDNSProviderConfig(&cloudflare.Config{AuthToken: l.DNSProvider.CfCloud.AuthToken, PropagationTimeout: 60 * time.Second, PollingInterval: 2 * time.Second, TTL: 600}); err != nil {
 			return
 		}
 	}
@@ -199,7 +198,7 @@ func (c *LeGoClient) NewClient(l *SettingLetsEncrypt) error {
 	if err != nil {
 		return err
 	}
-	if err := client.Challenge.SetDNS01Provider(Provider, dns01.AddRecursiveNameservers([]string{"114.114.114.114", "114.114.115.115"})); err != nil {
+	if err := client.Challenge.SetDNS01Provider(Provider, dns01.AddRecursiveNameservers([]string{"223.6.6.6", "223.5.5.5"})); err != nil {
 		return err
 	}
 	if legouser.Registration == nil {

server/dbdata/db.go

@@ -115,9 +115,8 @@ func addInitData() error {
 				SecretKey string `json:"secretKey"`
 			}{SecretID: "", SecretKey: ""},
 			CfCloud: struct {
-				AuthEmail string `json:"authEmail"`
+				AuthToken string `json:"authToken"`
-				AuthKey   string `json:"authKey"`
+			}{AuthToken: ""}},
-			}{AuthEmail: "", AuthKey: ""}},
 	}
 	err = SettingSessAdd(sess, provider)
 	if err != nil {

server/dbdata/group.go

@@ -117,11 +117,18 @@ func SetGroup(g *Group) error {
 				continue
 			}
 
-			ipMask, _, err := parseIpNet(v.Val)
+			ipMask, ipNet, err := parseIpNet(v.Val)
+
 			if err != nil {
 				return errors.New("RouteInclude 错误" + err.Error())
 			}
 
+			// 给Mac系统下发路由时，必须是标准的网络地址
+			if strings.Split(ipMask, "/")[0] != ipNet.IP.String() {
+				errMsg := fmt.Sprintf("RouteInclude 错误: 网络地址错误，建议： %s 改为 %s", v.Val, ipNet)
+				return errors.New(errMsg)
+			}
+
 			v.IpMask = ipMask
 			routeInclude = append(routeInclude, v)
 		}
@@ -130,10 +137,16 @@ func SetGroup(g *Group) error {
 	routeExclude := []ValData{}
 	for _, v := range g.RouteExclude {
 		if v.Val != "" {
-			ipMask, _, err := parseIpNet(v.Val)
+			ipMask, ipNet, err := parseIpNet(v.Val)
 			if err != nil {
 				return errors.New("RouteExclude 错误" + err.Error())
 			}
+
+			if strings.Split(ipMask, "/")[0] != ipNet.IP.String() {
+				errMsg := fmt.Sprintf("RouteInclude 错误: 网络地址错误，建议： %s 改为 %s", v.Val, ipNet)
+				return errors.New(errMsg)
+			}
+
 			v.IpMask = ipMask
 			routeExclude = append(routeExclude, v)
 		}

server/dbdata/policy.go

@@ -2,6 +2,7 @@ package dbdata
 
 import (
 	"errors"
+	"fmt"
 	"net"
 	"strings"
 	"time"
@@ -31,11 +32,16 @@ func SetPolicy(p *Policy) error {
 				continue
 			}
 
-			ipMask, _, err := parseIpNet(v.Val)
+			ipMask, ipNet, err := parseIpNet(v.Val)
 			if err != nil {
 				return errors.New("RouteInclude 错误" + err.Error())
 			}
 
+			if strings.Split(ipMask, "/")[0] != ipNet.IP.String() {
+				errMsg := fmt.Sprintf("RouteInclude 错误: 网络地址错误，建议： %s 改为 %s", v.Val, ipNet)
+				return errors.New(errMsg)
+			}
+
 			v.IpMask = ipMask
 			routeInclude = append(routeInclude, v)
 		}
@@ -45,10 +51,15 @@ func SetPolicy(p *Policy) error {
 	routeExclude := []ValData{}
 	for _, v := range p.RouteExclude {
 		if v.Val != "" {
-			ipMask, _, err := parseIpNet(v.Val)
+			ipMask, ipNet, err := parseIpNet(v.Val)
 			if err != nil {
 				return errors.New("RouteExclude 错误" + err.Error())
 			}
+
+			if strings.Split(ipMask, "/")[0] != ipNet.IP.String() {
+				errMsg := fmt.Sprintf("RouteInclude 错误: 网络地址错误，建议： %s 改为 %s", v.Val, ipNet)
+				return errors.New(errMsg)
+			}
 			v.IpMask = ipMask
 			routeExclude = append(routeExclude, v)
 		}

server/dbdata/policy_test.go

@@ -21,19 +21,19 @@ func TestGetPolicy(t *testing.T) {
 	err = SetPolicy(&p2)
 	ast.Nil(err)
 
-	route := []ValData{{Val: "192.168.1.1/24"}}
+	route := []ValData{{Val: "192.168.1.0/24"}}
 	p3 := Policy{Username: "a3", ClientDns: []ValData{{Val: "114.114.114.114"}}, RouteInclude: route, DsExcludeDomains: "com.cn,qq.com"}
 	err = SetPolicy(&p3)
 	ast.Nil(err)
 	// 判断 IpMask
-	ast.Equal(p3.RouteInclude[0].IpMask, "192.168.1.1/255.255.255.0")
+	ast.Equal(p3.RouteInclude[0].IpMask, "192.168.1.0/255.255.255.0")
 
-	route2 := []ValData{{Val: "192.168.2.1/24"}}
+	route2 := []ValData{{Val: "192.168.2.0/24"}}
 	p4 := Policy{Username: "a4", ClientDns: []ValData{{Val: "114.114.114.114"}}, RouteExclude: route2, DsIncludeDomains: "com.cn,qq.com"}
 	err = SetPolicy(&p4)
 	ast.Nil(err)
 	// 判断 IpMask
-	ast.Equal(p4.RouteExclude[0].IpMask, "192.168.2.1/255.255.255.0")
+	ast.Equal(p4.RouteExclude[0].IpMask, "192.168.2.0/255.255.255.0")
 
 	// 判断所有数据
 	var userPolicy *Policy

server/dbdata/user_test.go

@@ -17,12 +17,12 @@ func TestCheckUser(t *testing.T) {
 
 	// 添加一个组
 	dns := []ValData{{Val: "114.114.114.114"}}
-	route := []ValData{{Val: "192.168.1.1/24"}}
+	route := []ValData{{Val: "192.168.1.0/24"}}
 	g := Group{Name: group, Status: 1, ClientDns: dns, RouteInclude: route}
 	err := SetGroup(&g)
 	ast.Nil(err)
 	// 判断 IpMask
-	ast.Equal(g.RouteInclude[0].IpMask, "192.168.1.1/255.255.255.0")
+	ast.Equal(g.RouteInclude[0].IpMask, "192.168.1.0/255.255.255.0")
 
 	// 添加一个用户
 	u := User{Username: "aaa", Groups: []string{group}, Status: 1}
@@ -59,7 +59,7 @@ func TestCheckUser(t *testing.T) {
 	}
 	// 添加用户策略
 	dns2 := []ValData{{Val: "8.8.8.8"}}
-	route2 := []ValData{{Val: "192.168.2.1/24"}}
+	route2 := []ValData{{Val: "192.168.2.0/24"}}
 	p1 := Policy{Username: "aaa", Status: 1, ClientDns: dns2, RouteInclude: route2}
 	err = SetPolicy(&p1)
 	ast.Nil(err)

server/go.mod

@@ -19,7 +19,7 @@ require (
 	github.com/lib/pq v1.10.2
 	github.com/mattn/go-sqlite3 v1.14.9
 	github.com/orcaman/concurrent-map v1.0.0
-	github.com/pion/dtls/v2 v2.2.6
+	github.com/pion/dtls/v2 v2.2.7
 	github.com/pion/logging v0.2.2
 	github.com/pires/go-proxyproto v0.6.2
 	github.com/shirou/gopsutil v3.21.7+incompatible
@@ -29,14 +29,14 @@ require (
 	github.com/spf13/cast v1.3.1
 	github.com/spf13/cobra v1.2.1
 	github.com/spf13/viper v1.8.1
-	github.com/stretchr/testify v1.8.1
+	github.com/stretchr/testify v1.8.3
 	github.com/xhit/go-simple-mail/v2 v2.10.0
 	github.com/xlzd/gotp v0.0.0-20181030022105-c8557ba2c119
 	github.com/xuri/excelize/v2 v2.6.1
 	go.uber.org/atomic v1.10.0
-	golang.org/x/crypto v0.5.0
+	golang.org/x/crypto v0.8.0
-	golang.org/x/net v0.7.0
+	golang.org/x/net v0.9.0
-	golang.org/x/text v0.7.0
+	golang.org/x/text v0.9.0
 	golang.org/x/time v0.3.0
 	layeh.com/radius v0.0.0-20210819152912-ad72663a72ab
 	xorm.io/xorm v1.3.2
@@ -54,13 +54,12 @@ require (
 	github.com/jmespath/go-jmespath v0.4.0 // indirect
 	github.com/kr/text v0.2.0 // indirect
 	github.com/miekg/dns v1.1.50 // indirect
-	github.com/pion/transport/v2 v2.0.2 // indirect
+	github.com/pion/transport/v2 v2.2.1 // indirect
-	github.com/pion/udp/v2 v2.0.1 // indirect
 	github.com/pkg/errors v0.9.1 // indirect
 	github.com/tencentcloud/tencentcloud-sdk-go/tencentcloud/common v1.0.490 // indirect
 	github.com/tencentcloud/tencentcloud-sdk-go/tencentcloud/dnspod v1.0.490 // indirect
-	golang.org/x/mod v0.6.0-dev.0.20220419223038-86c51ed26bb4 // indirect
+	golang.org/x/mod v0.8.0 // indirect
-	golang.org/x/tools v0.1.12 // indirect
+	golang.org/x/tools v0.6.0 // indirect
 )
 
 require (
@@ -94,8 +93,8 @@ require (
 	github.com/tklauser/numcpus v0.2.3 // indirect
 	github.com/xuri/efp v0.0.0-20220603152613-6918739fd470 // indirect
 	github.com/xuri/nfp v0.0.0-20220409054826-5e722a1d9e22 // indirect
-	golang.org/x/sync v0.0.0-20220722155255-886fb9371eb4 // indirect
+	golang.org/x/sync v0.1.0 // indirect
-	golang.org/x/sys v0.5.0 // indirect
+	golang.org/x/sys v0.7.0 // indirect
 	gopkg.in/asn1-ber.v1 v1.0.0-20181015200546-f715ec2f112d // indirect
 	gopkg.in/ini.v1 v1.66.6 // indirect
 	gopkg.in/yaml.v2 v2.4.0 // indirect

server/go.sum

@@ -472,14 +472,12 @@ github.com/pelletier/go-toml v1.9.3/go.mod h1:u1nR/EPcESfeI/szUZKdtJ0xRNbUoANCko
 github.com/performancecopilot/speed v3.0.0+incompatible/go.mod h1:/CLtqpZ5gBg1M9iaPbIdPPGyKcA8hKdoy6hAWba7Yac=
 github.com/pierrec/lz4 v1.0.2-0.20190131084431-473cd7ce01a1/go.mod h1:3/3N9NVKO0jef7pBehbT1qWhCMrIgbYNnFAZCqQ5LRc=
 github.com/pierrec/lz4 v2.0.5+incompatible/go.mod h1:pdkljMzZIN41W+lC3N2tnIh5sFi+IEE17M5jbnwPHcY=
-github.com/pion/dtls/v2 v2.2.6 h1:yXMxKr0Skd+Ub6A8UqXTRLSywskx93ooMRHsQUtd+Z4=
+github.com/pion/dtls/v2 v2.2.7 h1:cSUBsETxepsCSFSxC3mc/aDo14qQLMSL+O6IjG28yV8=
-github.com/pion/dtls/v2 v2.2.6/go.mod h1:t8fWJCIquY5rlQZwA2yWxUS1+OCrAdXrhVKXB5oD/wY=
+github.com/pion/dtls/v2 v2.2.7/go.mod h1:8WiMkebSHFD0T+dIU+UeBaoV7kDhOW5oDCzZ7WZ/F9s=
 github.com/pion/logging v0.2.2 h1:M9+AIj/+pxNsDfAT64+MAVgJO0rsyLnoJKCqf//DoeY=
 github.com/pion/logging v0.2.2/go.mod h1:k0/tDVsRCX2Mb2ZEmTqNa7CWsQPc+YYCB7Q+5pahoms=
-github.com/pion/transport/v2 v2.0.2 h1:St+8o+1PEzPT51O9bv+tH/KYYLMNR5Vwm5Z3Qkjsywg=
+github.com/pion/transport/v2 v2.2.1 h1:7qYnCBlpgSJNYMbLCKuSY9KbQdBFoETvPNETv0y4N7c=
-github.com/pion/transport/v2 v2.0.2/go.mod h1:vrz6bUbFr/cjdwbnxq8OdDDzHf7JJfGsIRkxfpZoTA0=
+github.com/pion/transport/v2 v2.2.1/go.mod h1:cXXWavvCnFF6McHTft3DWS9iic2Mftcz1Aq29pGcU5g=
-github.com/pion/udp/v2 v2.0.1 h1:xP0z6WNux1zWEjhC7onRA3EwwSliXqu1ElUZAQhUP54=
-github.com/pion/udp/v2 v2.0.1/go.mod h1:B7uvTMP00lzWdyMr/1PVZXtV3wpPIxBRd4Wl6AksXn8=
 github.com/pires/go-proxyproto v0.6.2 h1:KAZ7UteSOt6urjme6ZldyFm4wDe/z0ZUP0Yv0Dos0d8=
 github.com/pires/go-proxyproto v0.6.2/go.mod h1:Odh9VFOZJCf9G8cLW5o435Xf1J95Jw9Gw5rnCjcwzAY=
 github.com/pkg/errors v0.8.0/go.mod h1:bwawxfHBFNV+L2hUp1rHADufV3IMtnDRdf1r5NINEl0=
@@ -578,8 +576,8 @@ github.com/stretchr/testify v1.6.1/go.mod h1:6Fq8oRcR53rry900zMqJjRRixrwX3KX962/
 github.com/stretchr/testify v1.7.0/go.mod h1:6Fq8oRcR53rry900zMqJjRRixrwX3KX962/h/Wwjteg=
 github.com/stretchr/testify v1.7.1/go.mod h1:6Fq8oRcR53rry900zMqJjRRixrwX3KX962/h/Wwjteg=
 github.com/stretchr/testify v1.8.0/go.mod h1:yNjHg4UonilssWZ8iaSj1OCr/vHnekPRkoO+kdMU+MU=
-github.com/stretchr/testify v1.8.1 h1:w7B6lhMri9wdJUVmEZPGGhZzrYTPvgJArz7wNPgYKsk=
+github.com/stretchr/testify v1.8.3 h1:RP3t2pwF7cMEbC1dqtB6poj3niw/9gnV4Cjg5oW5gtY=
-github.com/stretchr/testify v1.8.1/go.mod h1:w2LPCIKwWwSfY2zedu0+kehJoqGctiVI29o6fzry7u4=
+github.com/stretchr/testify v1.8.3/go.mod h1:sz/lmYIOXD/1dqDmKjjqLyZ2RngseejIcXlSw2iwfAo=
 github.com/subosito/gotenv v1.2.0 h1:Slr1R9HxAlEKefgq5jn9U+DnETlIUa6HfgEzj0g5d7s=
 github.com/subosito/gotenv v1.2.0/go.mod h1:N0PQaV/YGNqwC0u51sEeR/aUtSLEXKX9iv69rRypqCw=
 github.com/syndtr/goleveldb v1.0.0 h1:fBdIW9lB4Iz0n9khmH8w27SJ3QEJ7+IgjPEwGSZiFdE=
@@ -663,8 +661,8 @@ golang.org/x/crypto v0.0.0-20210322153248-0c34fe9e7dc2/go.mod h1:T9bdIzuCu7OtxOm
 golang.org/x/crypto v0.0.0-20210616213533-5ff15b29337e/go.mod h1:GvvjBRRGRdwPK5ydBHafDWAxML/pGHZbMvKqRZ5+Abc=
 golang.org/x/crypto v0.0.0-20210921155107-089bfa567519/go.mod h1:GvvjBRRGRdwPK5ydBHafDWAxML/pGHZbMvKqRZ5+Abc=
 golang.org/x/crypto v0.0.0-20220817201139-bc19a97f63c8/go.mod h1:IxCIyHEi3zRg3s0A5j5BB6A9Jmi73HwBIUl50j+osU4=
-golang.org/x/crypto v0.5.0 h1:U/0M97KRkSFvyD/3FSmdP5W5swImpNgle/EHFhOsQPE=
+golang.org/x/crypto v0.8.0 h1:pd9TJtTueMTVQXzk8E2XESSMQDj/U7OUu0PqJqPXQjQ=
-golang.org/x/crypto v0.5.0/go.mod h1:NK/OQwhpMQP3MwtdjgLlYHnH9ebylxKWv3e0fK+mkQU=
+golang.org/x/crypto v0.8.0/go.mod h1:mRqEX+O9/h5TFCrQhkgjo2yKi0yYA+9ecGkdQoHrywE=
 golang.org/x/exp v0.0.0-20190121172915-509febef88a4/go.mod h1:CJ0aWSM057203Lf6IL+f9T1iT9GByDxfZKAQTCR3kQA=
 golang.org/x/exp v0.0.0-20190306152737-a1d7652674e8/go.mod h1:CJ0aWSM057203Lf6IL+f9T1iT9GByDxfZKAQTCR3kQA=
 golang.org/x/exp v0.0.0-20190510132918-efd6b22b2522/go.mod h1:ZjyILWgesfNpC6sMxTJOJm9Kp84zZh5NQWvqDGG3Qr8=
@@ -702,8 +700,9 @@ golang.org/x/mod v0.3.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
 golang.org/x/mod v0.4.0/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
 golang.org/x/mod v0.4.1/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
 golang.org/x/mod v0.4.2/go.mod h1:s0Qsj1ACt9ePp/hMypM3fl4fZqREWJwdYDEqhRiZZUA=
-golang.org/x/mod v0.6.0-dev.0.20220419223038-86c51ed26bb4 h1:6zppjxzCulZykYSLyVDYbneBfbaBIQPYMevg0bEwv2s=
 golang.org/x/mod v0.6.0-dev.0.20220419223038-86c51ed26bb4/go.mod h1:jJ57K6gSWd91VN4djpZkiMVwK6gcyfeH4XE8wZrZaV4=
+golang.org/x/mod v0.8.0 h1:LUYupSeNrTNCGzR/hVBk2NHZO4hXcVaW1k4Qx7rjPx8=
+golang.org/x/mod v0.8.0/go.mod h1:iBbtSCu2XBx23ZKBPSOrRkjjQPZFPuis4dIYUhu/chs=
 golang.org/x/net v0.0.0-20180724234803-3673e40ba225/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
 golang.org/x/net v0.0.0-20180826012351-8a410e7b638d/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
 golang.org/x/net v0.0.0-20180906233101-161cd47e91fd/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
@@ -750,9 +749,9 @@ golang.org/x/net v0.0.0-20210726213435-c6fcb2dbf985/go.mod h1:9nx3DQGgdP8bBQD5qx
 golang.org/x/net v0.0.0-20211112202133-69e39bad7dc2/go.mod h1:9nx3DQGgdP8bBQD5qxJ1jj9UTztislL4KSBs9R2vV5Y=
 golang.org/x/net v0.0.0-20220722155237-a158d28d115b/go.mod h1:XRhObCWvk6IyKnWLug+ECip1KBveYUHfp+8e9klMJ9c=
 golang.org/x/net v0.0.0-20220812174116-3211cb980234/go.mod h1:YDH+HFinaLZZlnHAfSS6ZXJJ9M9t4Dl22yv3iI2vPwk=
-golang.org/x/net v0.5.0/go.mod h1:DivGGAXEgPSlEBzxGzZI+ZLohi+xUj054jfeKui00ws=
+golang.org/x/net v0.6.0/go.mod h1:2Tu9+aMcznHK/AK1HMvgo6xiTLG5rD5rZLDS+rp2Bjs=
-golang.org/x/net v0.7.0 h1:rJrUqqhjsgNp7KqAIc25s9pZnjU7TUcSY7HcVZjdn1g=
+golang.org/x/net v0.9.0 h1:aWJ/m6xSmxWBx+V0XRHTlrYrPG56jKsLdTFmsSsCzOM=
-golang.org/x/net v0.7.0/go.mod h1:2Tu9+aMcznHK/AK1HMvgo6xiTLG5rD5rZLDS+rp2Bjs=
+golang.org/x/net v0.9.0/go.mod h1:d48xBJpPfHeWQsugry2m+kC02ZBRGRgulfHnEXEuWns=
 golang.org/x/oauth2 v0.0.0-20180821212333-d2e6202438be/go.mod h1:N/0e6XlmueqKjAGxoOufVs8QHGRruUQn6yWY3a++T0U=
 golang.org/x/oauth2 v0.0.0-20190226205417-e64efc72b421/go.mod h1:gOpvHmFTYa4IltrdGE7lF6nIHvwfUNPOp7c8zoXwtLw=
 golang.org/x/oauth2 v0.0.0-20190604053449-0f29369cfe45/go.mod h1:gOpvHmFTYa4IltrdGE7lF6nIHvwfUNPOp7c8zoXwtLw=
@@ -776,8 +775,9 @@ golang.org/x/sync v0.0.0-20200625203802-6e8e738ad208/go.mod h1:RxMgew5VJxzue5/jJ
 golang.org/x/sync v0.0.0-20201020160332-67f06af15bc9/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
 golang.org/x/sync v0.0.0-20201207232520-09787c993a3a/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
 golang.org/x/sync v0.0.0-20210220032951-036812b2e83c/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
-golang.org/x/sync v0.0.0-20220722155255-886fb9371eb4 h1:uVc8UZUe6tr40fFVnUP5Oj+veunVezqYl9z7DYw9xzw=
 golang.org/x/sync v0.0.0-20220722155255-886fb9371eb4/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
+golang.org/x/sync v0.1.0 h1:wsuoTGHzEhffawBOhz5CYhcrV4IdKZbEyZjBMuTp12o=
+golang.org/x/sync v0.1.0/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
 golang.org/x/sys v0.0.0-20180823144017-11551d06cbcc/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
 golang.org/x/sys v0.0.0-20180830151530-49385e6e1522/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
 golang.org/x/sys v0.0.0-20180905080454-ebe1bf3edb33/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
@@ -843,14 +843,14 @@ golang.org/x/sys v0.0.0-20220412211240-33da011f77ad/go.mod h1:oPkhp1MJrh7nUepCBc
 golang.org/x/sys v0.0.0-20220520151302-bc2c85ada10a/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/sys v0.0.0-20220722155257-8c9f86f7a55f/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/sys v0.0.0-20220728004956-3c1f35247d10/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/sys v0.4.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/sys v0.5.0 h1:MUK/U/4lj1t1oPg0HfuXDN/Z1wv31ZJ/YcPiGccS4DU=
 golang.org/x/sys v0.5.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.7.0 h1:3jlCCIQZPdOYu1h8BkNvLz8Kgwtae2cagcG/VamtZRU=
+golang.org/x/sys v0.7.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/term v0.0.0-20201117132131-f5c789dd3221/go.mod h1:Nr5EML6q2oocZ2LXRh80K7BxOlk5/8JxuGnuhpl+muw=
 golang.org/x/term v0.0.0-20201126162022-7de9c90e9dd1/go.mod h1:bj7SfCRtBDWHUb9snDiAeCFNEtKQo2Wmx5Cou7ajbmo=
 golang.org/x/term v0.0.0-20210927222741-03fcf44c2211/go.mod h1:jbD1KX2456YbFQfuXm/mYQcufACuNUgVhRMnK/tPxf8=
-golang.org/x/term v0.4.0/go.mod h1:9P2UbLfCdcvo3p/nzKvsmas4TnlujnuoV9hGgYzW1lQ=
 golang.org/x/term v0.5.0/go.mod h1:jMB1sMXY+tzblOD4FWmEbocvup2/aLOaQEp7JmGp78k=
+golang.org/x/term v0.7.0/go.mod h1:P32HKFT3hSsZrRxla30E9HqToFYAQPCMs/zFMBUFqPY=
 golang.org/x/text v0.0.0-20170915032832-14c0d48ead0c/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
 golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
 golang.org/x/text v0.3.1-0.20180807135948-17ff2d5776d2/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
@@ -860,9 +860,9 @@ golang.org/x/text v0.3.4/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
 golang.org/x/text v0.3.5/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
 golang.org/x/text v0.3.6/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
 golang.org/x/text v0.3.7/go.mod h1:u+2+/6zg+i71rQMx5EYifcz6MCKuco9NR6JIITiCfzQ=
-golang.org/x/text v0.6.0/go.mod h1:mrYo+phRRbMaCq/xk9113O4dZlRixOauAjOtrjsXDZ8=
-golang.org/x/text v0.7.0 h1:4BRB4x83lYWy72KwLD/qYDuTu7q9PjSagHvijDw7cLo=
 golang.org/x/text v0.7.0/go.mod h1:mrYo+phRRbMaCq/xk9113O4dZlRixOauAjOtrjsXDZ8=
+golang.org/x/text v0.9.0 h1:2sjJmO8cDvYveuX97RDLsxlyUxLl+GHoLxBiRdHllBE=
+golang.org/x/text v0.9.0/go.mod h1:e1OnstbJyHTd6l/uOt8jFFHp6TRDWZR/bV3emEE/zU8=
 golang.org/x/time v0.0.0-20180412165947-fbb02b2291d2/go.mod h1:tRJNPiyCQ0inRvYxbN9jk5I+vvW/OXSQhTDSoE431IQ=
 golang.org/x/time v0.0.0-20181108054448-85acf8d2951c/go.mod h1:tRJNPiyCQ0inRvYxbN9jk5I+vvW/OXSQhTDSoE431IQ=
 golang.org/x/time v0.0.0-20190308202827-9d24e82272b4/go.mod h1:tRJNPiyCQ0inRvYxbN9jk5I+vvW/OXSQhTDSoE431IQ=
@@ -929,8 +929,9 @@ golang.org/x/tools v0.0.0-20210106214847-113979e3529a/go.mod h1:emZCQorbCU4vsT4f
 golang.org/x/tools v0.1.0/go.mod h1:xkSsbof2nBLbhDlRMhhhyNLN/zl3eTqcnHD5viDpcZ0=
 golang.org/x/tools v0.1.2/go.mod h1:o0xws9oXOQQZyjljx8fwUC0k7L1pTE6eaCbjGeHmOkk=
 golang.org/x/tools v0.1.6-0.20210726203631-07bc1bf47fb2/go.mod h1:o0xws9oXOQQZyjljx8fwUC0k7L1pTE6eaCbjGeHmOkk=
-golang.org/x/tools v0.1.12 h1:VveCTK38A2rkS8ZqFY25HIDFscX5X9OoEhJd3quQmXU=
 golang.org/x/tools v0.1.12/go.mod h1:hNGJHUnrk76NpqgfD5Aqm5Crs+Hm0VOH/i9J2+nxYbc=
+golang.org/x/tools v0.6.0 h1:BOw41kyTf3PuCW1pVQf8+Cyg8pMlkYB1oo9iJ6D/lKM=
+golang.org/x/tools v0.6.0/go.mod h1:Xwgl3UAJ/d3gWutnCtw505GrjyAbvKui8lOU390QaIU=
 golang.org/x/xerrors v0.0.0-20190410155217-1f06c39b4373/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
 golang.org/x/xerrors v0.0.0-20190513163551-3ee3066db522/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
 golang.org/x/xerrors v0.0.0-20190717185122-a985d3407aa7/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=

server/handler/dtls.go

@@ -2,10 +2,13 @@ package handler
 
 import (
 	"context"
+	"crypto/rand"
+	"crypto/rsa"
 	"crypto/tls"
 	"encoding/hex"
 	"errors"
 	"net"
+	"strings"
 	"time"
 
 	"github.com/bjdgyc/anylink/base"
@@ -20,10 +23,13 @@ func startDtls() {
 		return
 	}
 
-	certificate, err := selfsign.GenerateSelfSigned()
+	// rsa 兼容 open connect
+	priv, _ := rsa.GenerateKey(rand.Reader, 2048)
+	certificate, err := selfsign.SelfSign(priv)
 	if err != nil {
 		panic(err)
 	}
+
 	logf := logging.NewDefaultLoggerFactory()
 	logf.Writer = base.GetBaseLw()
 	// logf.DefaultLogLevel = logging.LogLevelTrace
@@ -34,12 +40,17 @@ func startDtls() {
 
 	config := &dtls.Config{
 		Certificates:         []tls.Certificate{certificate},
-		InsecureSkipVerify:   true,
 		ExtendedMasterSecret: dtls.DisableExtendedMasterSecret,
-		CipherSuites:         []dtls.CipherSuiteID{dtls.TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256},
+		CipherSuites: func() []dtls.CipherSuiteID {
-		LoggerFactory:        logf,
+			var cs = []dtls.CipherSuiteID{}
-		MTU:                  BufferSize,
+			for _, vv := range dtlsCipherSuites {
-		SessionStore:         sessStore,
+				cs = append(cs, vv)
+			}
+			return cs
+		}(),
+		LoggerFactory: logf,
+		MTU:           BufferSize,
+		SessionStore:  sessStore,
 		ConnectContextMaker: func() (context.Context, func()) {
 			return context.WithTimeout(context.Background(), 5*time.Second)
 		},
@@ -98,3 +109,23 @@ func (ms *sessionStore) Get(key []byte) (dtls.Session, error) {
 func (ms *sessionStore) Del(key []byte) error {
 	return nil
 }
+
+// 客户端和服务端映射 X-DTLS12-CipherSuite
+var dtlsCipherSuites = map[string]dtls.CipherSuiteID{
+	// "ECDHE-ECDSA-AES256-GCM-SHA384": dtls.TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,
+	// "ECDHE-ECDSA-AES128-GCM-SHA256": dtls.TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,
+	"ECDHE-RSA-AES256-GCM-SHA384": dtls.TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,
+	"ECDHE-RSA-AES128-GCM-SHA256": dtls.TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,
+}
+
+func checkDtls12Ciphersuite(ciphersuite string) string {
+	csArr := strings.Split(ciphersuite, ":")
+
+	for _, v := range csArr {
+		if _, ok := dtlsCipherSuites[v]; ok {
+			return v
+		}
+	}
+	// 返回默认值
+	return "ECDHE-RSA-AES128-GCM-SHA256"
+}

server/handler/link_auth.go

@@ -1,6 +1,7 @@
 package handler
 
 import (
+	"bytes"
 	"crypto/md5"
 	"encoding/xml"
 	"fmt"
@@ -49,7 +50,7 @@ func LinkAuth(w http.ResponseWriter, r *http.Request) {
 		return
 	}
 	// fmt.Printf("%+v \n", cr)
-	setCommonHeader(w)
+	// setCommonHeader(w)
 	if cr.Type == "logout" {
 		// 退出删除session信息
 		if cr.SessionToken != "" {
@@ -154,10 +155,12 @@ func tplRequest(typ int, w io.Writer, data RequestData) {
 		return
 	}
 
-	if strings.Contains(data.Banner, "\n") {
+	if data.Banner != "" {
-		// 替换xml文件的换行符
+		buf := new(bytes.Buffer)
-		data.Banner = strings.ReplaceAll(data.Banner, "\n", "
")
+		xml.EscapeText(buf, []byte(data.Banner))
+		data.Banner = buf.String()
 	}
+
 	t, _ := template.New("auth_complete").Parse(auth_complete)
 	_ = t.Execute(w, data)
 }

server/handler/link_base.go

@@ -3,7 +3,6 @@ package handler
 import (
 	"encoding/xml"
 	"log"
-	"net/http"
 	"os/exec"
 )
 
@@ -42,28 +41,6 @@ type macAddressList struct {
 	MacAddress string `xml:"mac-address"`
 }
 
-func setCommonHeader(w http.ResponseWriter) {
-	// Content-Length Date 默认已经存在
-	w.Header().Set("Server", "AnyLink")
-	w.Header().Set("Content-Type", "text/html; charset=utf-8")
-	w.Header().Set("Cache-Control", "no-store,no-cache")
-	w.Header().Set("Pragma", "no-cache")
-	w.Header().Set("Transfer-Encoding", "chunked")
-	w.Header().Set("Connection", "keep-alive")
-	w.Header().Set("X-Frame-Options", "deny")
-	w.Header().Set("X-Content-Type-Options", "nosniff")
-	w.Header().Set("Content-Security-Policy", "default-src 'none'")
-	w.Header().Set("X-Permitted-Cross-Domain-Policies", "none")
-	w.Header().Set("Referrer-Policy", "no-referrer")
-	w.Header().Set("Clear-Site-Data", "cache,cookies,storage")
-	w.Header().Set("Cross-Origin-Embedder-Policy", "require-corp")
-	w.Header().Set("Cross-Origin-Opener-Policy", "same-origin")
-	w.Header().Set("Cross-Origin-Resource-Policy", "same-origin")
-	w.Header().Set("X-XSS-Protection", "0")
-	w.Header().Set("X-Aggregate-Auth", "1")
-	w.Header().Set("Strict-Transport-Security", "max-age=31536000; includeSubDomains")
-}
-
 func execCmd(cmdStrs []string) error {
 	for _, cmdStr := range cmdStrs {
 		cmd := exec.Command("sh", "-c", cmdStr)

server/handler/link_home.go

@@ -13,7 +13,7 @@ func LinkHome(w http.ResponseWriter, r *http.Request) {
 	// fmt.Println(r.RemoteAddr)
 	// hu, _ := httputil.DumpRequest(r, true)
 	// fmt.Println("DumpHome: ", string(hu))
-	w.Header().Set("Server", "AnyLinkOpenSource")
+	w.Header().Set("Content-Type", "text/html; charset=utf-8")
 	connection := strings.ToLower(r.Header.Get("Connection"))
 	userAgent := strings.ToLower(r.UserAgent())
 	if connection == "close" && (strings.Contains(userAgent, "anyconnect") || strings.Contains(userAgent, "openconnect")) {

server/handler/link_tun.go

@@ -22,22 +22,29 @@ func checkTun() {
 	defer ifce.Close()
 
 	// 测试ip命令
-	cmdstr := fmt.Sprintf("ip link set dev %s up mtu %s multicast off", ifce.Name(), "1399")
+	base.CheckModOrLoad("tun")
-	err = execCmd([]string{cmdstr})
+
+	cmdstr1 := fmt.Sprintf("ip link set dev %s up mtu %s multicast off", ifce.Name(), "1399")
+	err = execCmd([]string{cmdstr1})
 	if err != nil {
 		base.Fatal("testTun err: ", err)
 	}
-	//开启服务器转发
+	// 开启服务器转发
 	if err := execCmd([]string{"sysctl -w net.ipv4.ip_forward=1"}); err != nil {
-		base.Error(err)
+		base.Fatal(err)
 	}
 	if base.Cfg.IptablesNat {
-		//添加NAT转发规则
+		// 添加NAT转发规则
 		ipt, err := iptables.New()
 		if err != nil {
-			base.Error(err)
+			base.Fatal(err)
 			return
 		}
+
+		// 修复 rockyos nat 不生效
+		base.CheckModOrLoad("iptable_filter")
+		base.CheckModOrLoad("iptable_nat")
+
 		natRule := []string{"-s", base.Cfg.Ipv4CIDR, "-o", base.Cfg.Ipv4Master, "-j", "MASQUERADE"}
 		forwardRule := []string{"-j", "ACCEPT"}
 		if natExists, _ := ipt.Exists("nat", "POSTROUTING", natRule...); !natExists {
@@ -65,7 +72,13 @@ func LinkTun(cSess *sessdata.ConnSession) error {
 	// log.Printf("Interface Name: %s\n", ifce.Name())
 	cSess.SetIfName(ifce.Name())
 
+	// 通过 ip link show  查看 alias 信息
+
 	cmdstr1 := fmt.Sprintf("ip link set dev %s up mtu %d multicast off", ifce.Name(), cSess.Mtu)
+	if !base.InContainer {
+		// 容器默认 iproute 不支持 alias
+		cmdstr1 += fmt.Sprintf(" alias %s.%s", cSess.Group.Name, cSess.Username)
+	}
 	cmdstr2 := fmt.Sprintf("ip addr add dev %s local %s peer %s/32",
 		ifce.Name(), base.Cfg.Ipv4Gateway, cSess.IpAddr)
 	err = execCmd([]string{cmdstr1, cmdstr2})

server/handler/link_tunnel.go

@@ -92,6 +92,10 @@ func LinkTunnel(w http.ResponseWriter, r *http.Request) {
 
 	base.Debug(cSess.IpAddr, cSess.MacHw, sess.Username, mobile)
 
+	// 检测密码套件
+	dtlsCiphersuite := checkDtls12Ciphersuite(r.Header.Get("X-Dtls12-Ciphersuite"))
+	base.Trace("dtlsCiphersuite", dtlsCiphersuite)
+
 	// 压缩
 	if cmpName, ok := cSess.SetPickCmp("cstp", r.Header.Get("X-Cstp-Accept-Encoding")); ok {
 		HttpSetHeader(w, "X-CSTP-Content-Encoding", cmpName)
@@ -164,7 +168,7 @@ func LinkTunnel(w http.ResponseWriter, r *http.Request) {
 	HttpSetHeader(w, "X-DTLS-Port", dtlsPort)
 	HttpSetHeader(w, "X-DTLS-DPD", fmt.Sprintf("%d", cstpDpd))
 	HttpSetHeader(w, "X-DTLS-Keepalive", fmt.Sprintf("%d", cstpKeepalive))
-	HttpSetHeader(w, "X-DTLS12-CipherSuite", "ECDHE-ECDSA-AES128-GCM-SHA256")
+	HttpSetHeader(w, "X-DTLS12-CipherSuite", dtlsCiphersuite)
 
 	HttpSetHeader(w, "X-CSTP-License", "accept")
 	HttpSetHeader(w, "X-CSTP-Routing-Filtering-Ignore", "false")
@@ -234,7 +238,11 @@ func SetPostAuthXml(g *dbdata.Group, w http.ResponseWriter) error {
 	if err != nil {
 		return err
 	}
-	HttpSetHeader(w, "X-CSTP-Post-Auth-XML", result.String())
+	xmlAuth := ""
+	for _, v := range strings.Split(result.String(), "\n") {
+		xmlAuth += strings.TrimSpace(v)
+	}
+	HttpSetHeader(w, "X-CSTP-Post-Auth-XML", xmlAuth)
 	return nil
 }
 

server/handler/link_vtap.go

@@ -33,13 +33,14 @@ func checkMacvtap() {
 
 	ifName := "anylinkMacvtap"
 	// 加载 macvtap
-	cmdstr0 := fmt.Sprintln("modprobe -i macvtap")
+	base.CheckModOrLoad("macvtap")
+
 	// 开启主网卡混杂模式
 	cmdstr1 := fmt.Sprintf("ip link set dev %s promisc on", base.Cfg.Ipv4Master)
 	// 测试 macvtap 功能
 	cmdstr2 := fmt.Sprintf("ip link add link %s name %s type macvtap mode bridge", base.Cfg.Ipv4Master, ifName)
 	cmdstr3 := fmt.Sprintf("ip link del %s", ifName)
-	err := execCmd([]string{cmdstr0, cmdstr1, cmdstr2, cmdstr3})
+	err := execCmd([]string{cmdstr1, cmdstr2, cmdstr3})
 	if err != nil {
 		base.Fatal(err)
 	}
@@ -55,6 +56,10 @@ func LinkMacvtap(cSess *sessdata.ConnSession) error {
 
 	cmdstr1 := fmt.Sprintf("ip link add link %s name %s type macvtap mode bridge", base.Cfg.Ipv4Master, ifName)
 	cmdstr2 := fmt.Sprintf("ip link set dev %s up mtu %d address %s", ifName, cSess.Mtu, cSess.MacHw)
+	if !base.InContainer {
+		// 容器默认 iproute 不支持 alias
+		cmdstr2 += fmt.Sprintf(" alias %s.%s", cSess.Group.Name, cSess.Username)
+	}
 	err := execCmd([]string{cmdstr1, cmdstr2})
 	if err != nil {
 		base.Error(err)

server/handler/payload_access_audit.go

@@ -3,6 +3,7 @@ package handler
 import (
 	"crypto/md5"
 	"encoding/binary"
+	"runtime/debug"
 	"time"
 
 	"github.com/bjdgyc/anylink/base"
@@ -101,11 +102,17 @@ func logAuditBatch() {
 
 // 解析IP包的数据
 func logAudit(userName string, pl *sessdata.Payload) {
-	defer putPayload(pl)
+	defer func() {
+		if err := recover(); err != nil {
+			base.Error("logAudit is panic: ", err, "\n", string(debug.Stack()), "\n", pl.Data)
+		}
+		putPayload(pl)
+	}()
 
 	if !(pl.LType == sessdata.LTypeIPData && pl.PType == 0x00) {
 		return
 	}
+
 	ipProto := waterutil.IPv4Protocol(pl.Data)
 	// 访问协议
 	var accessProto uint8
@@ -118,11 +125,15 @@ func logAudit(userName string, pl *sessdata.Payload) {
 	default:
 		return
 	}
-
+	// IP报文只包含头部信息时, 则打印LOG，并退出
+	ipPl := waterutil.IPv4Payload(pl.Data)
+	if len(ipPl) < 4 {
+		base.Error("ipPl len < 4", ipPl, pl.Data)
+		return
+	}
+	ipPort := (uint16(ipPl[2]) << 8) | uint16(ipPl[3])
 	ipSrc := waterutil.IPv4Source(pl.Data)
 	ipDst := waterutil.IPv4Destination(pl.Data)
-	ipPort := waterutil.IPv4DestinationPort(pl.Data)
-
 	b := getByte51()
 	key := *b
 	copy(key[:16], ipSrc)
@@ -178,7 +189,6 @@ func logAudit(userName string, pl *sessdata.Payload) {
 		AccessProto: accessProto,
 		Info:        info,
 	}
-
 	select {
 	case logBatch.LogChan <- audit:
 	default:

server/handler/payload_tcp_parser.go

@@ -29,7 +29,7 @@ func onTCP(payload []byte) (uint8, string) {
 }
 
 func sniNewParser(b []byte) (uint8, string) {
-	if len(b) < 2 || b[0] != 0x16 || b[1] != 0x03 {
+	if len(b) < 6 || b[0] != 0x16 || b[1] != 0x03 {
 		return acc_proto_tcp, ""
 	}
 	rest := b[5:]

server/handler/server.go

@@ -12,6 +12,7 @@ import (
 
 	"github.com/bjdgyc/anylink/base"
 	"github.com/bjdgyc/anylink/dbdata"
+	"github.com/bjdgyc/anylink/pkg/utils"
 	"github.com/gorilla/mux"
 	"github.com/pires/go-proxyproto"
 )
@@ -53,7 +54,6 @@ func startTls() {
 			base.Trace("GetCertificate", chi.ServerName)
 			return dbdata.GetCertificateBySNI(chi.ServerName)
 		},
-		// InsecureSkipVerify: true,
 	}
 	srv := &http.Server{
 		Addr:         addr,
@@ -86,6 +86,14 @@ func startTls() {
 
 func initRoute() http.Handler {
 	r := mux.NewRouter()
+	// 所有路由添加安全头
+	r.Use(func(next http.Handler) http.Handler {
+		return http.HandlerFunc(func(w http.ResponseWriter, req *http.Request) {
+			utils.SetSecureHeader(w)
+			next.ServeHTTP(w, req)
+		})
+	})
+
 	r.HandleFunc("/", LinkHome).Methods(http.MethodGet)
 	r.HandleFunc("/", LinkAuth).Methods(http.MethodPost)
 	r.HandleFunc("/CSCOSSLC/tunnel", LinkTunnel).Methods(http.MethodConnect)

server/pkg/utils/secure_header.go

@@ -0,0 +1,32 @@
+package utils
+
+import "net/http"
+
+// SetSecureHeader 设置安全的header头
+// https://blog.csdn.net/liwan09/article/details/130248003
+// https://zhuanlan.zhihu.com/p/335165168
+func SetSecureHeader(w http.ResponseWriter) {
+	// Content-Length Date 默认已经存在
+	w.Header().Set("Server", "AnyLinkOpenSource")
+	// w.Header().Set("Content-Type", "text/html; charset=utf-8")
+	// w.Header().Set("Transfer-Encoding", "chunked")
+	w.Header().Set("X-Aggregate-Auth", "1")
+
+	w.Header().Set("Cache-Control", "no-store,no-cache")
+	w.Header().Set("Pragma", "no-cache")
+	w.Header().Set("Connection", "keep-alive")
+	w.Header().Set("X-Frame-Options", "SAMEORIGIN")
+	w.Header().Set("X-Content-Type-Options", "nosniff")
+	w.Header().Set("X-Download-Options", "noopen")
+	w.Header().Set("Content-Security-Policy", "default-src 'self' 'unsafe-inline' 'unsafe-eval' data: blob:; frame-ancestors 'self'; base-uri 'self'; block-all-mixed-content")
+	w.Header().Set("X-Permitted-Cross-Domain-Policies", "none")
+	w.Header().Set("Referrer-Policy", "same-origin")
+	w.Header().Set("Cross-Origin-Embedder-Policy", "require-corp")
+	w.Header().Set("Cross-Origin-Opener-Policy", "same-origin")
+	w.Header().Set("Cross-Origin-Resource-Policy", "same-origin")
+	w.Header().Set("X-XSS-Protection", "1;mode=block")
+	w.Header().Set("Strict-Transport-Security", "max-age=31536000; includeSubDomains")
+
+	// w.Header().Set("Clear-Site-Data", "cache,cookies,storage")
+
+}

systemd/anylink.service

@@ -11,12 +11,14 @@ Restart=on-failure
 RestartSec=5s
 ExecStart=/usr/local/anylink-deploy/anylink --conf=/usr/local/anylink-deploy/conf/server.toml
 
+# systemctl --version
+
 # systemd older than v236
 # ExecStart=/bin/bash -c 'exec /usr/local/anylink-deploy/anylink --conf=/usr/local/anylink-deploy/conf/server.toml >> /usr/local/anylink-deploy/log/anylink.log 2>&1'
 
-
+# systemd new than v236
-StandardOutput=file:/usr/local/anylink-deploy/log/anylink.log
+# StandardOutput=file:/usr/local/anylink-deploy/log/anylink.log
-StandardError=file:/usr/local/anylink-deploy/log/anylink.log
+# StandardError=file:/usr/local/anylink-deploy/log/anylink.log
 
 [Install]
 WantedBy=multi-user.target

web/src/pages/group/List.vue

@@ -47,7 +47,12 @@
 
         <el-table-column
             prop="bandwidth"
-            label="带宽限制">
+            label="带宽限制"
+            width="90">
+            <template slot-scope="scope">
+                <el-row v-if="scope.row.bandwidth > 0">{{ convertBandwidth(scope.row.bandwidth, 'BYTE', 'Mbps') }} Mbps</el-row>
+                <el-row v-else>不限</el-row>
+            </template>            
         </el-table-column>
 
         <el-table-column
@@ -62,7 +67,7 @@
         <el-table-column
             prop="route_include"
             label="路由包含"
-            width="200">
+            width="180">
           <template slot-scope="scope">
             <el-row v-for="(item,inx) in scope.row.route_include.slice(0, readMinRows)" :key="inx">{{ item.val }}</el-row>
             <div v-if="scope.row.route_include.length > readMinRows">
@@ -77,7 +82,7 @@
         <el-table-column
             prop="route_exclude"
             label="路由排除"
-            width="200">
+            width="180">
           <template slot-scope="scope">
             <el-row v-for="(item,inx) in scope.row.route_exclude.slice(0, readMinRows)" :key="inx">{{ item.val }}</el-row>
             <div v-if="scope.row.route_exclude.length > readMinRows">
@@ -92,7 +97,7 @@
         <el-table-column
             prop="link_acl"
             label="LINK-ACL"
-            min-width="200">
+            min-width="180">
           <template slot-scope="scope">
             <el-row v-for="(item,inx) in scope.row.link_acl.slice(0, readMinRows)" :key="inx">
               {{ item.action }} => {{ item.val }} : {{ item.port }}
@@ -186,9 +191,9 @@
                 <el-input v-model="ruleForm.note"></el-input>
                 </el-form-item>
 
-                <el-form-item label="带宽限制" prop="bandwidth">
+                <el-form-item label="带宽限制" prop="bandwidth_format" style="width:260px;">
-                <el-input v-model.number="ruleForm.bandwidth">
+                <el-input v-model="ruleForm.bandwidth_format" oninput="value= value.match(/\d+(\.\d{0,2})?/) ? value.match(/\d+(\.\d{0,2})?/)[0] : ''">
-                    <template slot="append">BYTE/S</template>
+                    <template slot="append">Mbps</template>
                 </el-input>
                 </el-form-item>
                 <el-form-item label="排除本地网络" prop="allow_lan">
@@ -276,48 +281,60 @@
             <el-tab-pane label="路由设置" name="route">
                 <el-form-item label="包含路由" prop="route_include">
                 <el-row class="msg-info">
-                    <el-col :span="20">输入CIDR格式如: 192.168.1.0/24</el-col>
+                    <el-col :span="18">输入CIDR格式如: 192.168.1.0/24</el-col>
-                    <el-col :span="4">
+                    <el-col :span="2">
                     <el-button size="mini" type="success" icon="el-icon-plus" circle
                                 @click.prevent="addDomain(ruleForm.route_include)"></el-button>
                     </el-col>
-                </el-row>
+                    <el-col :span="4">
-                <el-row v-for="(item,index) in ruleForm.route_include"
+                      <el-button size="mini" type="info" icon="el-icon-edit" circle
-                        :key="index" style="margin-bottom: 5px" :gutter="10">
+                                @click.prevent="openIpListDialog('route_include')"></el-button>
-                    <el-col :span="10">
-                    <el-input v-model="item.val"></el-input>
-                    </el-col>
-                    <el-col :span="12">
-                    <el-input v-model="item.note" placeholder="备注"></el-input>
-                    </el-col>
-                    <el-col :span="2">
-                    <el-button size="mini" type="danger" icon="el-icon-minus" circle
-                                @click.prevent="removeDomain(ruleForm.route_include,index)"></el-button>
                     </el-col>                    
                 </el-row>
+                <templete v-if="activeTab == 'route'">
+                    <el-row v-for="(item,index) in ruleForm.route_include"
+                            :key="index" style="margin-bottom: 5px" :gutter="10">
+                        <el-col :span="10">
+                        <el-input v-model="item.val"></el-input>
+                        </el-col>
+                        <el-col :span="12">
+                        <el-input v-model="item.note" placeholder="备注"></el-input>
+                        </el-col>
+                        <el-col :span="2">
+                        <el-button size="mini" type="danger" icon="el-icon-minus" circle
+                                    @click.prevent="removeDomain(ruleForm.route_include,index)"></el-button>
+                        </el-col>
+                    </el-row>
+                </templete>
                 </el-form-item>
 
                 <el-form-item label="排除路由" prop="route_exclude">
                 <el-row class="msg-info">
-                    <el-col :span="20">输入CIDR格式如: 192.168.2.0/24</el-col>
+                    <el-col :span="18">输入CIDR格式如: 192.168.2.0/24</el-col>
-                    <el-col :span="4">
+                    <el-col :span="2">
                     <el-button size="mini" type="success" icon="el-icon-plus" circle
                                 @click.prevent="addDomain(ruleForm.route_exclude)"></el-button>
                     </el-col>
-                </el-row>
+                    <el-col :span="4">
-                <el-row v-for="(item,index) in ruleForm.route_exclude"
+                      <el-button size="mini" type="info" icon="el-icon-edit" circle
-                        :key="index" style="margin-bottom: 5px" :gutter="10">
+                                @click.prevent="openIpListDialog('route_exclude')"></el-button>
-                    <el-col :span="10">
-                    <el-input v-model="item.val"></el-input>
-                    </el-col>
-                    <el-col :span="12">
-                    <el-input v-model="item.note" placeholder="备注"></el-input>
-                    </el-col>
-                    <el-col :span="2">
-                    <el-button size="mini" type="danger" icon="el-icon-minus" circle
-                                @click.prevent="removeDomain(ruleForm.route_exclude,index)"></el-button>
                     </el-col>                    
                 </el-row>
+                <templete v-if="activeTab == 'route'">
+                    <el-row v-for="(item,index) in ruleForm.route_exclude"
+                            :key="index" style="margin-bottom: 5px" :gutter="10">
+                        <el-col :span="10">
+                        <el-input v-model="item.val"></el-input>
+                        </el-col>
+                        <el-col :span="12">
+                        <el-input v-model="item.note" placeholder="备注"></el-input>
+                        </el-col>
+                        <el-col :span="2">
+                        <el-button size="mini" type="danger" icon="el-icon-minus" circle
+                                    @click.prevent="removeDomain(ruleForm.route_exclude,index)"></el-button>
+                        </el-col>
+                    </el-row>
+                </templete>
                 </el-form-item>
             </el-tab-pane>
             <el-tab-pane label="权限控制" name="link_acl">
@@ -360,6 +377,7 @@
                 </el-form-item>                
                 <el-form-item label="排除域名" prop="ds_exclude_domains">
                     <el-input type="textarea" :rows="5" v-model="ruleForm.ds_exclude_domains" placeholder="输入域名用,号分隔，默认匹配所有子域名, 如baidu.com,163.com"></el-input>
+                    <div class="msg-info">注：域名拆分隧道，仅支持AnyConnect的桌面客户端，不支持移动端.</div>
                 </el-form-item>
             </el-tab-pane>
             <el-form-item>
@@ -393,6 +411,25 @@
             </el-form-item>
         </el-form>
     </el-dialog> 
+    <!--编辑模式弹窗-->
+    <el-dialog
+    :close-on-click-modal="false"
+    title="编辑模式"
+    :visible.sync="ipListDialog"
+    width="650px"
+    custom-class="valgin-dialog"
+    center>
+      <el-form ref="ipEditForm" label-width="80px">
+          <el-form-item label="路由表" prop="ip_list">
+              <el-input type="textarea" :rows="10" v-model="ipEditForm.ip_list" placeholder="每行一条路由，例：192.168.1.0/24,备注 或 192.168.1.0/24"></el-input>
+              <div class="msg-info">当前共 {{ ipEditForm.ip_list.trim() === '' ? 0 : ipEditForm.ip_list.trim().split("\n").length }} 条（注：AnyConnect客户端最多支持{{ this.maxRouteRows }}条路由）</div>
+          </el-form-item>
+          <el-form-item>
+              <el-button type="primary" @click="ipEdit()" :loading="ipEditLoading">更新</el-button>
+              <el-button @click="ipListDialog = false">取 消</el-button>
+          </el-form-item>
+      </el-form>
+    </el-dialog>
   </div>
 </template>
 
@@ -419,6 +456,7 @@ export default {
       activeTab : "general",
       readMore: {},
       readMinRows : 5,
+      maxRouteRows : 2500,
       defAuth : {
                 type:'local', 
                 radius:{addr:"", secret:""},
@@ -435,6 +473,7 @@ export default {
       },          
       ruleForm: {
         bandwidth: 0,
+        bandwidth_format: '0',
         status: 1,
         allow_lan: true,
         client_dns: [{val: '114.114.114.114'}],
@@ -444,11 +483,17 @@ export default {
         auth : {},
       },
       authLoginDialog : false,
+      ipListDialog : false,
       authLoginLoading : false,      
       authLoginForm : {
         name : "",
         pwd : "",
       },
+      ipEditForm: {
+        ip_list: "",
+        type : "",
+      },
+      ipEditLoading : false,
       authLoginRules: {
         name: [
           {required: true, message: '请输入账号', trigger: 'blur'},
@@ -463,9 +508,9 @@ export default {
           {required: true, message: '请输入组名', trigger: 'blur'},
           {max: 30, message: '长度小于 30 个字符', trigger: 'blur'}
         ],
-        bandwidth: [
+        bandwidth_format: [
           {required: true, message: '请输入带宽限制', trigger: 'blur'},
-          {type: 'number', message: '带宽限制必须为数字值'}
+          {type: 'string', message: '带宽限制必须为数字值'}
         ],
         status: [
           {required: true}
@@ -536,6 +581,7 @@ export default {
           id: row.id,
         }
       }).then(resp => {
+        resp.data.data.bandwidth_format = this.convertBandwidth(resp.data.data.bandwidth, 'BYTE', 'Mbps').toString();
         this.ruleForm = resp.data.data;        
         this.setAuthData(resp.data.data);
       }).catch(error => {
@@ -582,6 +628,7 @@ export default {
           console.log('error submit!!');
           return false;
         }
+        this.ruleForm.bandwidth = this.convertBandwidth(this.ruleForm.bandwidth_format, 'Mbps', 'BYTE');
         axios.post('/group/set', this.ruleForm).then(resp => {
           const rdata = resp.data;
           if (rdata.code === 0) {
@@ -636,6 +683,70 @@ export default {
         });
       });
     },
+    openIpListDialog(type) {
+      this.ipListDialog = true;
+      this.ipEditForm.type = type;
+      this.ipEditForm.ip_list = this.ruleForm[type].map(item => item.val + (item.note ? "," + item.note : "")).join("\n");      
+    },
+    ipEdit() {
+        this.ipEditLoading = true;
+        let ipList = [];
+        if (this.ipEditForm.ip_list.trim() !== "") {
+            ipList = this.ipEditForm.ip_list.trim().split("\n");
+        }        
+        let arr = [];
+        for (let i = 0; i < ipList.length; i++) {
+          let item = ipList[i];
+          if (item.trim() === "") {
+            continue;
+          }
+          let ip = item.split(",");
+          if (ip.length > 2) {
+            ip[1] = ip.slice(1).join(",");
+          }
+          let note = ip[1] ? ip[1] : "";
+          const pushToArr = () => {
+            arr.push({val: ip[0], note: note});
+          };
+          if (this.ipEditForm.type == "route_include" && ip[0] == "all") {
+            pushToArr();
+            continue;  
+          }
+          let valid = this.isValidCIDR(ip[0]);
+          if (!valid.valid) {
+                this.$message.error("错误：CIDR格式错误，建议 " + ip[0] + " 改为 " + valid.suggestion);
+                this.ipEditLoading = false;
+                return;
+          }
+          pushToArr();
+        }
+        this.ruleForm[this.ipEditForm.type] = arr;
+        this.ipEditLoading = false;
+        this.ipListDialog = false;
+    },
+    isValidCIDR(input) {
+        const cidrRegex = /^((25[0-5]|2[0-4]\d|[01]?\d\d?)\.){3}(25[0-5]|2[0-4]\d|[01]?\d\d?)\/([12]?\d|3[0-2])$/;
+        if (!cidrRegex.test(input)) {
+            return { valid: false, suggestion: null };
+        }
+        const [ip, mask] = input.split('/');
+        const maskNum = parseInt(mask);
+        const ipParts = ip.split('.').map(part => parseInt(part));
+        const binaryIP = ipParts.map(part => part.toString(2).padStart(8, '0')).join('');
+        for (let i = maskNum; i < 32; i++) {
+            if (binaryIP[i] === '1') {
+                const binaryNetworkPart = binaryIP.substring(0, maskNum).padEnd(32, '0');
+                const networkIPParts = [];
+                for (let j = 0; j < 4; j++) {
+                    const octet = binaryNetworkPart.substring(j * 8, (j + 1) * 8);
+                    networkIPParts.push(parseInt(octet, 2));
+                }
+                const suggestedIP = networkIPParts.join('.');
+                return { valid: false, suggestion: `${suggestedIP}/${mask}` };
+            }
+        }
+        return { valid: true, suggestion: null };
+    },
     resetForm(formName) {
       this.$refs[formName].resetFields();
     },
@@ -666,6 +777,18 @@ export default {
     closeDialog() {
       this.user_edit_dialog = false;
       this.activeTab = "general";
+    },
+    convertBandwidth(bandwidth, fromUnit, toUnit) {
+        const units = {
+            bps: 1,
+            Kbps: 1000,
+            Mbps: 1000000,
+            Gbps: 1000000000,
+            BYTE: 8,
+        };
+        const result = bandwidth * units[fromUnit] / units[toUnit];
+        const fixedResult = result.toFixed(2);
+        return parseFloat(fixedResult);
     }
   },
 }

web/src/pages/set/Other.vue

@@ -248,11 +248,14 @@
           <el-form-item label="自定义首页" prop="homeindex">
             <el-input
               type="textarea"
-              :rows="5"
+              :rows="10"
               placeholder="请输入内容"
               v-model="dataOther.homeindex"
             >
             </el-input>
+            <el-tooltip content="自定义内容可以参考 home 目录下的文件" placement="top">
+              <i class="el-icon-question"></i>
+            </el-tooltip>
           </el-form-item>
 
           <el-form-item label="账户开通邮件" prop="account_mail">
@@ -318,8 +321,7 @@ export default {
           secretKey: "",
         },
         cfcloud: {
-          authEmail: "",
+          authToken: "",
-          authKey: "",
         },
       },
       customCert: { cert: "", key: "" },
@@ -399,19 +401,13 @@ export default {
         ],
         cfcloud: [
           {
-            label: "Email",
+            label: "AuthToken",
-            prop: "email",
+            prop: "authToken",
-            component: "el-input",
-            type: "text",
-          },
-          {
-            label: "AuthKey",
-            prop: "authKey",
             component: "el-input",
             type: "password",
             rules: {
               required: true,
-              message: "请输入正确的APIKey",
+              message: "请输入正确的AuthToken",
               trigger: "blur",
             },
           },
@@ -551,12 +547,20 @@ export default {
               });
             break;
           case "letsCert":
+            var loading = this.$loading({
+              lock: true,
+              text: "证书申请中...",
+              spinner: "el-icon-loading",
+              background: "rgba(0, 0, 0, 0.7)",
+            });
             axios.post("/set/other/createcert", this.letsCert).then((resp) => {
               var rdata = resp.data;
               console.log(rdata);
               if (rdata.code === 0) {
+                loading.close();
                 this.$message.success(rdata.msg);
               } else {
+                loading.close();
                 this.$message.error(rdata.msg);
               }
             });