修复通过自动部署脚本部署之后，无法正常打开的问题

uwsgi.ini和uwsgiserver中的配置修改成通过脚本变量自动替换。
如果是手动安装的，自行修改配置即可，相信能手动部署的也是有一定Linux基础的同学。

auto-install.sh

@@ -68,7 +68,7 @@ done
 
 echo "======================================================================="
 while :; do echo
-    read -p "请输入密码自助平台使用的端口: " PWD_SELF_SERVICE_PORT
+    read -p "请输入密码自助平台使用的端口(不要和Nginx一样): " PWD_SELF_SERVICE_PORT
     check_port ${PWD_SELF_SERVICE_PORT}
     if [[ $? -ne 0 ]]; then
       echo "---输入的端口有误，请重新输入。"
@@ -79,7 +79,7 @@ done
 
 echo "======================================================================="
 while :; do echo
-    read -p "请输入密码自助平台使用域名，例如：pwd.abc.com: " PWD_SELF_SERVICE_DOMAIN
+    read -p "请输入密码自助平台使用域名，例如：pwd.abc.com（不需要加http://或https://） " PWD_SELF_SERVICE_DOMAIN
     check_domain ${PWD_SELF_SERVICE_DOMAIN}
     if [[ $? -ne 0 ]]; then
       echo "---输入的域名格式有误，请重新输入。"
@@ -91,6 +91,8 @@ done
 ##当前脚本的绝对路径
 SHELL_FOLDER=$(dirname $(readlink -f "$0"))
 
+
+
 echo "关闭SELINUX"
 sudo setenforce 0
 sudo sed -i 's@SELINUX=*@SELINUX=disabled@g' /etc/selinux/config
@@ -138,31 +140,32 @@ fi
 
 ##install python3
 ##如果之前用此脚本安装过python3，后续就不会再次安装。
-python_ver='3.8.9'
+PYTHON_VER='3.8.9'
-if [[ -f "/usr/share/python-${python_ver}/bin/python3" ]]
+PYTHON_INSTALL_DIR=/usr/share/python-${PYTHON_VER}
+if [[ -f "${PYTHON_INSTALL_DIR}/bin/python3" ]]
 then
     echo "己发现Python3，将不会安装。"
 else
-    if [[ -f "Python-${python_ver}.tar.xz" ]]
+    if [[ -f "Python-${PYTHON_VER}.tar.xz" ]]
     then
-        echo "将安装Python${python_ver}"
+        echo "将安装Python${PYTHON_VER}"
-        tar xf Python-${python_ver}.tar.xz
+        tar xf Python-${PYTHON_VER}.tar.xz
-        cd Python-${python_ver}
+        cd Python-${PYTHON_VER}
-        sudo ./configure --prefix=/usr/share/python-${python_ver} && make && make install
+        sudo ./configure --prefix=${PYTHON_INSTALL_DIR} && make && make install
     else
-        echo "脚本目录下没有发现Python${python_ver}.tar.xz，将会下载python ${python_ver}"
+        echo "脚本目录下没有发现Python${PYTHON_VER}.tar.xz，将会下载python ${PYTHON_VER}"
-        sudo wget https://www.python.org/ftp/python/${python_ver}/Python-${python_ver}.tar.xz
+        sudo wget https://www.python.org/ftp/python/${PYTHON_VER}/Python-${PYTHON_VER}.tar.xz
-        tar xf Python-${python_ver}.tar.xz
+        tar xf Python-${PYTHON_VER}.tar.xz
-        cd Python-${python_ver}
+        cd Python-${PYTHON_VER}
-        sudo ./configure --prefix=/usr/share/python-${python_ver} && make && make install
+        sudo ./configure --prefix=${PYTHON_INSTALL_DIR} && make && make install
     fi
 
     if [[ $? -eq 0 ]]
     then
       echo "创建python3和pip3的软件链接"
       cd ${SHELL_FOLDER}
-      sudo ln -svf /usr/share/python-${python_ver}/bin/python3 /usr/bin/python3
+      sudo ln -svf ${PYTHON_INSTALL_DIR}/bin/python3 /usr/bin/python3
-      sudo ln -svf /usr/share/python-${python_ver}/bin/pip3 /usr/bin/pip3
+      sudo ln -svf ${PYTHON_INSTALL_DIR}/bin/pip3 /usr/bin/pip3
       echo "======================================================================="
       echo "Python3 安装成功！"
       echo "======================================================================="
@@ -204,6 +207,8 @@ fi
 ##处理配置文件
 echo "======================================================================="
 echo "处理uwsgi.ini配置文件"
+CPU_NUM=$(cat /proc/cpuinfo | grep processor | wc -l)
+sed -i "s@CPU_NUM@${CPU_NUM}@g" ${SHELL_FOLDER}/uwsgi.ini
 sed -i "s@PWD_SELF_SERVICE_HOME@${SHELL_FOLDER}@g" ${SHELL_FOLDER}/uwsgi.ini
 sed -i "s@PWD_SELF_SERVICE_IP@${PWD_SELF_SERVICE_IP}@g" ${SHELL_FOLDER}/uwsgi.ini
 sed -i "s@PWD_SELF_SERVICE_PORT@${PWD_SELF_SERVICE_PORT}@g" ${SHELL_FOLDER}/uwsgi.ini
@@ -211,6 +216,7 @@ echo "处理uwsgi.ini配置文件完成"
 echo
 echo "处理uwsgiserver启动脚本"
 sed -i "s@PWD_SELF_SERVICE_HOME@${SHELL_FOLDER}@g" ${SHELL_FOLDER}/uwsgiserver
+sed -i "s@PYTHON_INSTALL_DIR@${PYTHON_INSTALL_DIR}@g" ${SHELL_FOLDER}/uwsgiserver
 alias cp='cp'
 cp -f ${SHELL_FOLDER}/uwsgiserver /etc/init.d/uwsgiserver
 chmod +x /etc/init.d/uwsgiserver

uwsgi.ini

@@ -1,15 +1,15 @@
 [uwsgi]
-http-socket = 0.0.0.0:8000
+http-socket = PWD_SELF_SERVICE_IP:PWD_SELF_SERVICE_PORT
 
-chdir = /opt/password-self-service
+chdir = PWD_SELF_SERVICE_HOME
  
 module = pwdselfservice.wsgi:application
 
 master = true
  
-processes = 4
+processes = CPU_NUM
  
-threads = 4
+threads = CPU_NUM
  
 max-requests = 2000
  
@@ -21,8 +21,8 @@ vacuum = true
 post-buffering = 4096
 
 #设置静态文件
-static-map = /static=/opt/password-self-service/static
+static-map = /static=PWD_SELF_SERVICE_HOME/static
 
 #设置日志目录
-daemonize = /opt/password-self-service/log/uwsgi.log
+daemonize = PWD_SELF_SERVICE_HOME/log/uwsgi.log
 

uwsgiserver

@@ -6,7 +6,7 @@
 # processname: uwsgiserver
 
 INI="PWD_SELF_SERVICE_HOME/uwsgi.ini"
-UWSGI="/usr/share/python-3.6.9/bin/uwsgi"
+UWSGI="PYTHON_INSTALL_DIR/bin/uwsgi"
 PSID="ps aux | grep "uwsgi"| grep -v "grep" | wc -l"
 
 if [ ! -n "$1" ]